EAW JFX200 specifications Features, Description, Application, Performance, Physical

FEATURES

•Ideal size and performance for rigorous all-purpose use

•Wave Guide Plate™ optimizes HF pattern for near field applications

•HF compression driver and vented LF for fully professional performance

•Asymmetric enclosure provides multiple mounting angles

•Pole mount cup & fly track, plus Omnimount®

Series 300 or similar mounting points

• Passive or bi-amplified operating modes

DESCRIPTION

The JFX200 is a 2-way multi-purpose loudspeaker. Its multi- functional design adds considerably to its value as a full- range loudspeaker. Combining high output and natural repro- duction, it is specifically outfitted to serve in a variety of both portable and permanent applications. The asymmetric enclosure provides typical angles needed for ceiling and wall mounting as well as for stage monitor operation. For perma- nent installation, enclosure hardware includes mounting points for an Omnimount® Series 300 or similar bracket and fly track for suspension. Provisions for portable use include a pole mount cup, top/bottom fly track for rigging, and handles integral to the enclosure that facilitate handling and trans- port. The JFX200 is particularly suitable as a nearer field main loudspeaker or as a fill/delay element in larger systems. Its wide angle projection makes audience coverage easy in a vari- ety of situations. While the JFX200 is well suited as is for many applications, the addition of a subwoofer expands its capabilities for more demanding applications such as for hous- es of worship, theaters, and band PA. Six year warranty.

APPLICATION

•Portable systems or permanent installations

•Wall and ceiling mountings

•Ideal size and output for wide range of program material

•Main PA reinforcement in medium-sized spaces

•Downfill for flown clusters

•High SPL under balcony / stage lip / delay fill

•A/V and/or surround sound installations

•Voice & F/X reinforcement in themed attractions

PERFORMANCE

Frequency Response (1 W @ 1 m)

±3 dB 90 Hz to 16 kHz

-10 dB 60 Hz

Axial Sensitivity (dB SPL, 1 W @ 1 m)

Full Range 97

LF 97

HF 104

Impedance (Ohms)

Full Range 8

LF 8

HF 8

SPECIFICATIONS JFX200

Power Handling (Watts, continuous)

Full Range 500

LF 500

HF 200

Calculated Maximum Output (dB SPL @ 1 m)

Full Range Peak 130

LF/HF Peak 130/133

Full Range Long Term 124

LF/HF Long Term 124/127

Nominal Coverage Angle / -6 dB points (degrees)

Conical 90

PHYSICAL

Part Number	0002816
System Configuration	2-way, full-range
Powering	Switchable: Passive (LF/HF
	crossover) or bi-amplified
LF Subsystem	1x 12-in, vented
HF Subsystem	1x 1.4-in exit/3-in voice coil
	neodymium compression driver
	on Wave Guide Plate™
Controls (switches, knobs)	Powering mode switch
Recommended High-Pass
Frequency (24 dB/octave)	60 Hz
Enclosure Materials	Exterior grade Baltic birch plywood
Finish	Wear resistant textured black paint
Connectors	2x Neutrik NL4 Speakon
Hardware	Pole mount cup (bottom); 2x 3-
	position fly track (bottom); 1x
	11-position fly track (top); 4x
	5/16”-18 mounting points for
	Omnimount Series 300 (rear)
Grille	Powder coated perforated steel,
	foam backed

One Main Street, Whitinsville, MA 01588	508 234 6158	Toll Free 800 992 5013	FAX 508 234 8251	info@eaw.com	www. eaw. com
EAW products are continually improved. All specifications are therefore subject to change without notice.			JFX200/0004639/2 pp	September 2002	Printed in USA