FEATURES

Ideal size and performance for rigorous all-purpose use

Wide 90° coverage optimized for use in stand-alone applications

HF compression driver and vented LF for fully professional performance

Asymmetric enclosure provides multiple mounting angles

Pole mount cup & fly track, plus Omnimount®

Series 300 or similar mounting points

Passive or bi-amplified operating modes

DESCRIPTION

The JFX290 is a 2-way multi-purpose loudspeaker. Its multi- functional design adds considerably to its value as a full- range loudspeaker. Combining high output and natural repro- duction, it is specifically outfitted to serve in a variety of both portable and permanent applications. The asymmetric enclosure provides typical angles needed for ceiling and wall mounting as well as for stage monitor operation. For perma- nent installation, enclosure hardware includes mounting points for an Omnimount® Series 300 or similar bracket and fly track for suspension. Provisions for portable use include a pole mount cup, top/bottom fly track for rigging, and handles integral to the enclosure that facilitate handling and trans- port. The JFX290 is particularly suitable as a near field main loudspeaker or as a fill/delay element in larger systems. While the JFX290 is well suited as is for many applications, the addition of a subwoofer expands its capabilities for more demanding applications such as for houses of worship, theaters, and band PA. Six year warranty.

APPLICATION

Portable systems or permanent installations

Wall and ceiling mountings

Ideal size and output for wide range of program material

Main PA reinforcement in medium- to

large-sized spaces

Downfill for flown clusters

High SPL stage lip / delay fill

A/V and/or surround sound installations

Voice & F/X reinforcement in themed attractions

PERFORMANCE

Frequency Response (1 W @ 1 m)

±3 db 90 Hz to 16 kHz

-10 dB 60 Hz

Axial Sensitivity (dB SPL, 1 W @ 1 m)

Full Range 97

LF 97

HF 104

Impedance (Ohms)

Full Range 8

LF 8

HF 8

SPECIFICATIONS JFX290

Power Handling (Watts, continuous)

Full Range 500

LF 500

HF 200

Calculated Maximum Output (dB SPL @ 1 m)

Full Range Peak

130

LF/HF Peak

130/133

Full Range Long Term

124

LF/HF Long Term

124/127

Nominal Coverage Angle / -6 dB points (degrees)

Horizontal

90

Vertical

45

PHYSICAL

Part Number

0002821

System Configuration

2-way, full-range

Powering

Switchable: Passive (LF/HF

 

crossover) or bi-amplified

LF Subsystem

1x 12-in, vented

HF Subsystem

1x 1.4-in exit/3-in voice coil

 

neodymium compression driver

 

on CD horn

Controls (switches, knobs)

Powering mode switch

Recommended High-Pass

 

Frequency (24 dB/octave)

60 Hz

Enclosure Materials

Exterior grade Baltic birch plywood

Finish

Wear resistant textured black paint

Connectors

2x Neutrik NL4 Speakon

Hardware

Pole mount cup (bottom); 2x 3-

 

position fly track (bottom); 1x

 

11-position fly track (top); 4x

 

5/16”-18 mounting points for

 

Omnimount Series 300 (rear)

Grille

Powder coated perforated steel,

 

foam backed

One Main Street, Whitinsville, MA 01588

508 234 6158

Toll Free 800 992 5013

FAX 508 234 8251

info@eaw.com

www. eaw. com

EAW products are continually improved. All specifications are therefore subject to change without notice.

JFX290/0004641/2 pp

September 2002

Printed in USA

Page 1
Image 1
EAW JFX290 specifications Features, Description, Application, Performance, Physical