EAW JFX88 specifications Features, Description, Application, Performance, Physical

FEATURES

•Minimally sized for smallest venues and lowest profile applications

•HF compression driver and vented LF for fully professional performance

•Wave Guide Plate™ optimizes HF pattern for near field applications

•Asymmetric enclosure provides multiple mounting angles

•Pole mount cup plus U-bracket & Omnimount® Series 100 or similar mounting points

•Passive crossover for easy operation and economical powering

DESCRIPTION

The JFX88 is a 2-way ultra-compact multi-use loudspeaker. Its multi-functional design adds considerably to its value as a full-range loudspeaker. Combining high output and natural reproduction, it is specifically outfitted to serve in a variety of both portable and permanent applications. The asymmet- ric enclosure provides typical angles needed for ceiling and wall mounting as well as for stage monitor operation. For permanent installation, enclosure hardware includes mount- ing points for an optional U-bracket and an Omnimount® Series 100 or similar bracket. A pole mount cup is provided for portable use. The JFX88 is particularly suitable as a nearfield main loudspeaker or as a fill/delay element in larg- er systems. Its wide angle projection makes audience cover- age easy. While the JFX88 is well suited as is for many appli- cations, the addition of a subwoofer expands its capabilities for more demanding applications such as for small houses of worship, theaters, and band PA. Six year warranty.

APPLICATION

•Portable systems or permanent installations

•Wall and ceiling mountings

•Very low profile appearance

•Main PA reinforcement in small spaces

•Under balcony / stage lip / delay fill

•A/V and/or surround sound installations

•Voice & F/X reinforcement in themed attractions

PERFORMANCE

Frequency Response (1 W @ 1 m)

±3 dB 115 Hz to 20 kHz

-10 dB 70 Hz

Axial Sensitivity (dB SPL, 1 W @ 1 m)

Full Range 94

Impedance (Ohms)

Full Range 8

Power Handling (Watts, continuous)

Full Range 300

SPECIFICATIONS JFX88

Calculated Maximum Output (dB SPL @ 1 m)

Full Range Peak 125

Full Range Long Term 119

Nominal Coverage Angle / -6 dB points (degrees)

Conical 100

PHYSICAL

Part Number	0001753
System Configuration	2-way, full-range
Powering	Passive LF/HF crossover
LF Subsystem	1x 8-in, vented
HF Subsystem	1x 1-in exit/1.4-in voice coil
	compression driver on Wave
	Guide Plate™
Recommended High-Pass
Frequency (24 dB/octave)	70 Hz
Enclosure Materials	Exterior grade Baltic birch plywood
Finish	Wear resistant textured black paint
Connectors	2x Neutrik NL4 Speakon
Hardware	Pole mount cup (bottom); 4x
	5/16”-18 threaded mounting
	points for Omnimount Series 100
	(rear); 2x 3/8”-16 threaded
	mounting/suspension points (1
	each top and bottom) for wall
	mount bracket
Grille	Powder coated perforated steel,
	foam backed
Dimensions	inches	millimeters
Height	17.46	443
Width (front)	9.79	249
Width (rear)	4.42	112
Depth	9.20	234
Weights	pounds	kilograms
Net Weight	27	12.3
Shipping Weight	31	14.1

One Main Street, Whitinsville, MA 01588	508 234 6158	Toll Free 800 992 5013	FAX 508 234 8251	info@eaw.com	www. eaw. com
EAW products are continually improved. All specifications are therefore subject to change without notice.			JFX88/0004637/2 pp	September 2002	Printed in USA