EAW Dimensional Drawing, A & E Specifications, PHYSICAL continued, SPECIFICATIONS KF755F

DIMENSIONAL DRAWING

CABINET TO BE SYMMETRICAL ABOUT CENTERLINE DESIGNATIONS.

INDICATES CENTER OF BALANCE.

INDICATES FLY TRACK MOUNTING POINTS.

	.38	￿		4.13	￿
		27.00	￿
31.38	￿	CL ￿￿		18.88	￿
		GRILL PARTIALLY SHOWN			￿

FRONT

		3.63	￿
				INPUT	￿
16.25	￿			6.63	￿
		CL ￿￿
		BACK	4.00	￿
	(8.78)	￿
	4.44	￿

STACK PAD ￿

34.00	￿				9.81	￿
			￿
	9.25
			C	￿		15.62		1￿
			L	￿
(1.37)	￿		22.90	￿
			30	° ￿	(.25)	￿
		TOP/BOTTOM			￿
			27.80	￿	4.50		￿
	7.28	￿		6.44	￿
	10￿.87		￿			3.00		￿
510776 (0)							7.75		￿
7/26/99			SIDES		￿

Manufacturing tolerances are +/- 0.13 and +/- 1°

SPECIFICATIONS KF755F

A & E SPECIFICATIONS

The three-way full range downfill loudspeaker system shall incorporate a 12-in LF transducer, a 10-in MF cone transduc- er and a 2-in exit/4-in voice coil compression driver HF trans- ducer.

The LF driver shall be mounted in a vented enclosure tuned for optimum low frequency response. The MF driver shall be mounted on an asymmetrical, large-format horn and shall be coupled to a phase plug whose geometry exactly matches that of the driver. The HF driver shall be loaded on an asym- metrical constant directivity horn with a nominal coverage pattern of 35° (h) x 35° (v, 0° to -35°).

System frequency response shall vary no more than ±3 dB from 48 Hz to 18 kHz measured on axis. The loudspeaker’s subsystems (LF/MF/HF) shall produce a Sound Pressure Level (SPL) of 103/109/115 dB SPL on axis at 1 meter with a power input of 1 Watt, and shall be capable of producing a peak output of 132/140/144 dB SPL on axis at 1 meter. The sub- systems (LF/MF/HF) shall handle 600/400/200 Watts of amplifier power (continuous) and shall have nominal imped- ances of 8/8/8 Ohms.

The loudspeaker enclosure shall be trapezoidal in shape. It shall be constructed of multi-ply void-free cross-grain-lami- nated Baltic birch plywood and shall employ extensive inter- nal bracing. It shall be finished in black catalyzed polyurethane. Input connectors shall be 2x Neutrik NL8 Speakon. A total of eight 4-position flytracks (4 each front and rear) shall be provided. The front of the loudspeaker shall be covered with a powder coated perforated steel grille.

The three-way full range downfill loudspeaker system shall be the EAW model KF755F.

Dimensions	inches	millimeters
Height	31.4	797
Width (Front)	27.0	686
Width (Rear)	8.8	233
Depth	34.0	864

PHYSICAL continued

Cabinet Type (shape)

Enclosure Materials

Finish

Connectors

Suspension Hardware

Grille

Trapezoid

Baltic birch plywood

Black catalyzed polyurethane

2x Neutrik NL8 Speakon

8x 4-position flytracks (4 each front and rear)

Powder coated perforated steel, foam backed

Trapezoid Angle 15 degrees per side

Weights	pounds		kilograms
Net Weight		168	76.4
Shipping Weight	178		81.0
Companion Systems
Sub Bass		SB750F/SB1000e/KF940
Full Range		KF750F
Accessories		KF700 Series caster pallet

One	Main Street, Whitinsville, MA 01588	508 234 6158	Toll Free 800 992 5013	FAX 508	234 8251	info@eaw.com	www. eaw. com
EAW	products are continually improved. All specifications are therefore subject to change without notice.			KF755F/2	pp	October 2001	Printed in USA