EAW KF761 specifications Description, Application, Performance, Physical

DESCRIPTION

The KF761 is part of the KF760 Line Array Series. The KF760 Series uses advanced divergence shading where all loud- speakers are powered at equal level. A full KF760/KF761 array can provide uniform sound coverage from directly beneath itself out to hundreds of feet without complex signal pro- cessing. Vertical coverage for the array is set by varying the splay of the rear of the enclosures, leaving the fronts tight- packed. This configuration produces a continuous, coherent wavefront from the array, projecting extended range, high res- olution sound over its full coverage area.

Fully professional construction features include Baltic birch plywood enclosures, heavy-duty steel grilles, Neutrik NL8 connectors, heavy duty bar handles, rear hand-holds, and accessory caster pallets. Six Year Warranty.

APPLICATION

This high output touring system is scalable from theaters under 1,000 seats to stadiums. The KF761 has two applica- tions. KF761s are designed to supplement KF760s in an array to provide near-field coverage for distances less than 70 feet. The KF761 can also be used as part of a KF761-only array for applications with coverage distances up to about 100 feet. The minimum KF761 array size is four enclosures for full per- formance. When used with KF760s they can be used singly or in multiples depending on the coverage needed. For extend- ing the low frequency response, KF940 bent horn subwoofers are an ideal complement to KF761s or a KF760 Series array.

Applications include:
Arenas	Convention Centers	Large Ballrooms
Stadiums	Theaters	Music Pavilions
Auditoriums	Outdoor Events

PERFORMANCE

Frequency Response (Hz)
±3 dB (1) Enclosure Array	80 Hz to 16 kHz
±3 dB (4) Enclosure Array	60 Hz to 16 kHz
Axial Sensitivity (dB SPL, 1 Watt @ 1m)
LF Single Enclosure	96
MF Single Enclosure	107
HF Single Enclosure	112
Impedance (Ohms)
LF	2x 8
MF	8 (2@16 Ohm each)
HF	8

Power Handling (Watts Continuous)

LF 2000

MF 500

HF 150

SPECIFICATIONS KF761

Recommended High-Pass Frequency

24dB/Octave 40 Hz

Calculated Maximum Output (dB SPL @ 1m)

Single Enclosure

LF Peak 135

MF Peak 1407

HF Peak 140

LF Long Term 129

MF Long Term 134

HF Long Term 134

Nominal Coverage Angle, -6 dB points (degrees)

Horizontal 100

Maximum Vertical Splay 12

PHYSICAL

Product Group		S
System Configuration		3-way, full range
Powering		Tri-amplified
LF Subsystem		2x 12-in woofers, horn-loaded
MF Subsystem		2x 8-in cone, slot-loaded
HF Subsystem		2-in exit/3-in voice coil com
		pression driver, horn-loaded
Enclosure (shape)		Horizontal trapezoid
Enclosure Materials	Exterior grade Baltic birch
		plywood
Finish		Wear-resistant black textured
		paint
Connectors		2x Neutrik NL8
Suspension Hardware		Proprietary EAW rigging system
Grille		Powder coated perforated steel
Dimensions		inches	millimeters
Front Height		14.5	368
Rear Height		8.3	210
Width		45.0	1143
Depth	30.8		784
Trapezoid Angle		6 degrees top and bottom
Weights		pounds	kilograms
Net Weight		206	93.4
Shipping Weight		214	97.1

One	Main Street, Whitinsville, MA 01588	508 234 6158	Toll Free 800 992 5013	FAX 508 234 8251	info@eaw.com	www. eaw. com
EAW	products are continually improved. All specifications are therefore subject to change without notice.			KF761/0002963/2 pp	April 2002	Printed in USA