SPECIFICATIONS LA325
DIMENSIONAL DRAWING
| A |
|
|
|
|
|
|
|
| NOTES: |
|
|
|
|
|
| 1. SYMBOL INDICATES 4.00 X 1.35 FLY TRACK. | |||
|
|
| 2. SYMBOL INDICATES MOUNTING |
| ||
8.90 |
|
| POINT, |
| ||
|
| 3. SYMBOL INDICATES RUBBER FOOT. | ||||
|
|
| ||||
|
|
| 4. SYMBOL INDICATES CENTER OF BALANCE. | |||
| C |
| 5. WEIGHT APPROX 165 LBS. |
| ||
| L |
| 6. SHIPPING WEIGHT APPROX. 173 LBS. | |||
| 14.22 |
|
|
|
|
|
| 20° |
|
| 2X HANDLE |
| |
| TOP A | 2.13 | 16.34 | 7.00 | ||
|
|
| ||||
| 20.84 |
| 8.86 |
|
| C |
|
|
|
|
|
| L |
|
|
|
| 2.97 |
|
|
|
| 38° |
| 17.82 |
| 23.06 |
|
|
|
|
| 21.37 | |
|
| 3.00 | LA |
|
| |
|
|
|
|
| ||
47.00 |
|
|
| 4.50 | 4.25 |
|
|
|
|
|
| ||
47.50 |
|
|
|
|
|
|
|
| 43.00 |
| 3X HANDLE |
| |
|
|
|
| INPUT |
| |
| FRONT |
| VIEW |
|
| BACK |
GRILLE PARTIALLY SHOWN | DIMMENSIONS APPLY |
|
|
| ||
| 14.24 |
| TO BOTH SIDES |
|
|
|
| 3X 4.50 |
|
|
|
| |
8.44 |
|
|
|
|
| |
C |
|
|
|
|
| |
|
|
|
|
|
| |
| L |
|
|
|
|
|
|
| 3.03 |
|
|
|
|
8.86 |
|
|
|
|
|
|
|
| 19.50 |
|
|
| |
|
| 3X 8.75 |
|
|
|
|
8.80 | 14.34 |
|
|
| 510024 (4) | |
|
|
|
|
| ||
| BOTTOM |
|
|
|
|
|
Manufacturing tolerances are +/- 0.13 and +/- 1° |
|
|
|
A & E SPECIFICATIONS
The
The LF drivers shall be mounted in a vented enclosure tuned for optimum low frequency response. The MF drivers shall be mounted in a sealed subenclosure. The HF driver shall be loaded on an asymmetrical wave guide plate with a nominal coverage pattern of 90° (h) x 70° (v). An internal passive fil- ter network shall provide fourth order acoustical crossover and system equalization.
System frequency response shall vary no more than ±3 dB from 50 Hz to 20 kHz measured on axis. In passive mode, the loudspeaker shall produce a Sound Pressure Level (SPL) of 100 dB SPL on axis at 1 meter with a power input of 1 Watt, and shall be capable of producing a peak output of 133.8 SPL on axis at 1 meter. It shall handle 600 Watts of amplifier power (AES Standard) and shall have a nominal impedance of 4 Ohms.
In
The loudspeaker enclosure shall be trapezoidal in shape. It shall be constructed of exterior grade Baltic birch plywood and shall employ extensive internal bracing. It shall be fin- ished in wear resistant textured black paint. Input connectors shall be dual Neutrik NL4 Speakon. The system shall include a switch allowing it to be operated in biamp or passive power- ing mode. The following mounting/suspension hardware shall be provided: two
The
One Main Street, Whitinsville, MA 01588 | 508 234 6158 | Toll Free 800 992 5013 | FAX 508 234 8251 | info@eaw. com | www. eaw. com |
EAW products are continually improved. All specifications are therefore subject to change without notice. | LA325/0004838/001/2 pp | September 2002 | Printed in USA |