US O C A
T
|
|
|
|
| ORMA |
|
|
| |
|
|
|
| RF | N |
|
| ||
|
|
| E |
|
| CE |
| ||
|
| P |
|
|
|
| P | ||
| L |
|
|
|
|
|
| A | |
A |
|
|
|
|
|
|
| T | |
IC |
|
|
|
|
|
|
|
| R |
|
|
|
|
|
|
|
| N | |
|
|
|
|
|
|
|
|
| E |
|
|
|
|
|
|
|
|
| R |
|
|
|
|
|
|
|
|
| S |
|
|
|
|
|
|
|
|
| H |
|
|
|
|
|
|
|
|
| I |
|
|
|
|
|
|
|
|
| P |
TECHNICAL SPECIFICATIONS LS832
DIMENSIONAL DRAWING
ARCHITECTURAL SPECIFICATIONS
LS832
6.25
CABINET TO BE SYMMETRICAL ABOUT CENTERLINE DESIGNATIONS.
MOUNTING POINT
CENTER OF BALANCE.
C | 6.00 |
L | 3.25 |
|
The
All eleven drivers shall be mounted in a vertical column to create a line source. The LF drivers shall be mounted four each above and below the three HF drivers. An internal fre- quency shading filter set shall maximize beneficial line source coupling while minimizing grading lobes. An internal pas- sive filter network shall provide fourth order acoustical cross- over and system equalization between the low and high fre- quency sections.
44.08 |
| C |
|
|
|
| L |
|
|
|
|
|
| C |
|
|
|
| L |
|
|
|
| 1.12 |
|
|
|
| 3.25 |
| INPUT |
|
|
|
| 7.00 |
|
| TOP/BOTTOM |
|
|
|
| |
| 2.12 |
|
|
|
FRONT | 2.05 BACK |
| SIDES |
|
|
|
| 3° | 510691 (D) |
|
|
|
| exp 8/24/98 shb |
SERVICE ITEMS |
|
|
| |
LF: Complete Cone Driver |
|
|
| |
EAW Part No. | 804082 |
|
|
|
HF: Complete Compression Driver/Tweeter |
| |||
EAW Part No. | 805015 |
|
|
|
Filter/Crossover Network |
|
|
| |
Complete Assembly: EAW Part No. | 225396 |
| ||
NOMINAL DATA |
|
|
| |
Frequency Response (1 Watt @ 1m) |
| |||
| ±3 dB | 200 Hz to 20 kHz |
| |
| 100Hz |
|
| |
Axial Sensitivity (dB SPL, 1 Watt @ 1m) |
| |||
| Full Range | 97 |
|
|
Impedance (Ohms) |
|
|
| |
| Full Range | 12 |
|
|
Power Handling, AES Standard (Watts) |
| |||
| Full Range | 200 |
|
|
Calculated Maximum Output (dB SPL) |
| |||
Full Range Peak | 126.0 |
|
| |
Full Range Long Term | 120.0 |
|
|
System frequency response shall vary no more than ±3 dB from 200 Hz to 20 kHz measured on axis. The system shall produce a Sound Pressure Level (SPL) of 97 dB SPL on axis at 1 meter with a power input of 1 Watt, and shall be capable of producing a peak output of 126.0 dB SPL on axis at 1 meter. The system shall handle 200 Watts of amplifier power (AES Standard) and shall have a nominal impedance of 12 Ohms.
The loudspeaker enclosure shall be rectangular in shape with a convex arc to the front baffle. It shall be constructed of 15mm thickness
The
Acoustic Performance Partnership | Eastern Acoustic Works | LS832 |
One Main Street, Whitinsville MA, 01588 USA • Phone