EAW MQ1366e specifications Features, Description, Application, Performance, Physical

FEATURES

•Dedicated horn loaded MF/HF array module

•10-in MF w/ Radial Phase Plug™; 2-in exit Neodymium HF

•60° x 60° beamwidth

•Vertically configured to create horizontal arrays

DESCRIPTION

A dedicated mid/high system in a vented trapezoidal enclo- sure. Includes a horn-loaded 10-in MF cone with Radial Phase Plug™ and a 2-in exit/3-in diaphragm Neodymium compres- sion driver. The MF and HF horns provide a nominal 60° x 60° beamwidth. An internal passive crossover with jumpers on the input panel allows user selection of either bi-amplified or passive operation. In either case digital signal processing is required to achieve specified performance. The enclosure features a comprehensive system of 3/8”-16 threaded sus- pension points.

APPLICATION

The MQ1366e employs a no-compromise design where the mid and high frequency horns are truly large enough to provide optimal pattern control throughout each passband. The horns feature a rigid but well-damped construction using wood veneer backed by structural foam. The MQ1366e has been designed to work with a complementary MQ1300 Series LF loudspeaker to create a full-range audio system, but may also be used without a LF complement for voice-only applications. The enclosure is vertically configured for arraying in horizon- tal rows. Horizontal arrays are typically used in venues, such as houses of worship, where the array must address wide, fan- shaped audiences.

Application Usage: Install
Houses of Worship	Auditoriums
Theatres	Arenas
Performing Arts Centers	Stadiums

PERFORMANCE

Frequency Response (1 W @ 1m)
±3 dB	250	Hz to 12 kHz
-10 dB	200	Hz
Axial Sensitivity (dB SPL, 1 Watt @ 1m)
Passive	107
MF	109
HF	107
Impedance (Ohms)

Passive 8

MF 8

HF 8

Power Handling, AES Standard (Watts)

Passive 325

MF 400

HF 150

SPECIFICATIONS MQ1366e

Calculated Maximum Output (dB SPL)

Passive Peak 138

MF Peak 141

HF Peak 135

Passive Long Term 132

MF Long Term 135

HF Long Term 129

Nominal Coverage Angle/-6 dB points (degrees)

Horizontal 60

Vertical 60

Recommended High-Pass Frequency

24 dB/Octave 200 Hz

PHYSICAL

Configuration	Mid/High
Powering	Passive or Bi-amplified
MF Subsystem	1x 10-in horn-loaded cone,
HF Subsystem	Radial Phase Plug™
	1x 2-in exit/3-in voice voil com-
	pression driver on constant
Enclosure Materials	directivity horn
	Exterior grade Baltic birch plywood
Finish	Wear resistant textured black paint
Connectors	Terminal barrier strip
Suspension Hardware	16x 3/8"-16 threaded mounting
	suspension points (4 each top,
Grille	bottom and sides)
	Powder coated perforated steel
Dimensions	inches	millimeters
Height	40.00	1016
Width (front)	32.00	813
Width (rear)	8.12	206
Depth	25.61	650
Trapezoid Angle	25° per side
Weights	pounds	kilograms
Net Weight	148	67.3
Shipping Weight	156	71.0

One Main Street, Whitinsville, MA 01588	508 234 6158	Toll Free 800 992 5013	FAX 508 234 8251	info@eaw.com	www. eaw. com
EAW products are continually improved. All specifications are therefore subject to change without notice.			MQ1366e/0002679/2 pp	April 2002	Printed in USA