EAW specifications Dimensional Drawing, A & E Specifications, SPECIFICATIONS MQ1394e

DIMENSIONAL DRAWING

(8.12)	A
L
C
	11.91
25.61
12.50	5.00
		A
12.16
23.28
50°		MQ1394e
TOP

DIMENSIONS APPLY

TO TOP AND BOTTOM

SPECIFICATIONS MQ1394e

A & E SPECIFICATIONS

The 2-way mid/high loudspeaker shall incorporate a 10-in MF cone with Radial Phase Plug™, and a 2-in exit/3-in diaphragm HF compression driver. The MF and HF devices shall be loaded on horns that provide a nominal 90° x 40° beamwidth. An internal passive crossover network shall offer either passive or bi-amplified operation, configurable via jumpers on the input panel.

System frequency response shall vary no more than 63 dB from

32.00

40.00

GRILL PARTIALLY SHOWN

FRONT

6.37 13.15

	5.00
36.10		C
		L

	VIEW A-A	11.89
1.95 DIMENSIONS APPLY		INPUT
	TO BOTH SIDES

4.00

34.93

19.75

C

L

BACK

250 Hz to 15 kHz measured on axis. When amplified using the internal passive crossover network, the loudspeaker shall pro- duce a sound pressure level of 109 dB SPL on axis at 1 meter with a power input of 1 watt, and shall be capable of produc- ing a peak output of 140 dB SPL on axis at 1 meter. It shall handle 325 watts of amplifier power (AES Standard) and shall have a nominal impedance of 8 ohms. When bi-amplified, the MF section shall produce a sound pressure level of 112 dB SPL on axis at 1 meter with a power input of 1 watt, and shall be capable of producing a peak output of 144 dB SPL on axis at

NOTES:

1.SYMBOL INDICATES MOUNTING POINT, 3/8-16 THREADED HOLE (PI ANGLE).

2.SYMBOL INDICATES NON LOAD BEARING MOUNTING POINT, 3/8-16 THREADED HOLE (PI ANGLE).

3.SYMBOL INDICATES CENTER OF BALANCE.

4.WEIGHT APPROX. 155 LBS.

5.SHIPPING WEIGHT APPROX. 180 LBS.

Manufacturing tolerances are +/- 0.13 and +/- 1°

1 meter. It shall handle 400 watts of amplifier power (AES Standard) and shall have a nominal impedance of 8 ohms. The HF section shall produce a sound pressure level of 109 dB SPL on axis at 1 meter with a power input of 1 watt, and shall be capable of producing a peak output of 137 dB SPL on axis at 1 meter. It shall handle 150 watts of amplifier power (AES Standard) and shall have a nominal impedance of 8 ohms.

The loudspeaker enclosure shall be trapezoidal in shape. It shall be constructed of exterior grade Baltic birch plywood and shall employ extensive internal bracing. It shall be finished in wear-resistant textured black paint. Input connectors shall be

aterminal strip. A total of 16x 3/8”-16 threaded mounting/suspension points (4 each top, bottom, and sides) shall be provided. The front of the loudspeaker shall be cov- ered with a powder coated perforated steel grille.

The 2-way mid/high loudspeaker shall be the EAW model MQ1394e.

One Main Street, Whitinsville, MA 01588	508 234 6158	Toll Free 800 992 5013	FAX 508 234 8251	info@eaw. com	www. eaw. com
EAW products are continually improved. All specifications are therefore subject to change without notice.			MQ1394e/0002680/2 pp	April 2002	Printed in USA