DIMENSIONAL DRAWING
SPECIFICATIONS MQTD412
A & E SPECIFICATIONS
INDICATES MOUNTING POINT,
MQTD412 | 3/8-16 THREADED HOLE (PI ANGLE). |
| INDICATES CENTER OF BALANCE. |
24.00
INPUT
40.00
10.69
GRILLE PARTIALLY SHOWN
The low frequency loudspeaker systems shall incorporate 2x 12-in plus 2x 8-in LF transducers. Each driver pair shall be spaced so as to create a tuned dipolar array. The driver pairs shall require an active crossover at 250 Hz, 24 dB/octave. The system shall provide 10-12 dB attenuation 90° off axis (v) from 160 Hz to 500 Hz.
System frequency response shall vary no more than ±3 dB from 58 Hz to 500 Hz measured on axis. The 12-in driver pair shall produce a Sound Pressure Level (SPL) of 101 dB SPL on axis at 1 meter with a power input of 1 Watt, and shall be capable
| (12.75) | FRONT | | BACK |
| ACCESS PANEL | 1.95 |
| 13.15 |
| 10.34 | | |
| | | |
| | C | | |
| | L | | |
| | 21.00 | | |
| | 9.31 | 36.10 | |
| | | |
17.15
5.68°
30
TOP/BOTTOM
DIMENSIONS APPLY | | | | 6.37 |
TO TOP & BOTTOM | | | |
| | | |
509001 (A) | SIDES |
exp 3/29/00 dpm |
Manufacturing tolerances are +/- 0.13 and +/- 1°
of producing a peak output of 137 SPL on axis at 1 meter. The 12-in driver pair shall handle 1000 Watts of amplifier power (AES Standard) and shall have a nominal impedance of 2x 8 Ohms.
The 8-in driver pair shall produce a Sound Pressure Level (SPL) of 101 dB SPL on axis at 1 meter with a power input of 1 Watt, and shall be capable of producing a peak output of 133 SPL on axis at 1 meter. The 8-in driver pair shall handle 400 Watts of amplifier power (AES Standard) and shall have a nominal impedance of 2x 12 Ohms.
The loudspeaker enclosure shall be trapezoidal in shape. It shall be constructed of 1/2-in thickness void-free cross-grain- laminated Baltic birch plywood and shall employ extensive internal bracing. It shall be finished in wear-resistant textured black paint. Input connectors shall be dual four-terminal bar- rier strips. A total of sixteen 3/8"-16 Threaded Mounting Points (4 each top, bottom, and sides) shall be provided. The front of the loudspeaker shall be covered with a powder coat- ed perforated steel grille.
The low frequency loudspeaker shall be the EAW model MQTD412.
One Main Street, Whitinsville, MA 01588 | 508 234 6158 | Toll Free 800 992 5013 | FAX 508 234 8251 | info@eaw. com | www. eaw. com |
EAW products are continually improved. All specifications are therefore subject to change without notice. | MQTD412/888173 Rev(1)/2 pp 7/25/00 | Printed in USA |