EAW MQV1366 specifications Dimensional Drawing, Nominal Data, Architectural Specifications

US O C A

T

				ORMA
			RF		N
		E				CE
	P						P
	L							A
A								T
IC								R
								N
								E
								R
								S
								H
								I
								P

TECHNICAL SPECIFICATIONS MQV1366

DIMENSIONAL DRAWING

MQV1366	INDICATES MOUNTING POINT,
	16X 3/8-16 THREADED HOLE (PI ANGLE).
56.25	12.50		5.62	ACCESS PANEL
	C			7.37
26.65	L
GRILLE PARTIALLY SHOWN	ACCESS		BACK
	PANEL
FRONT	WITH
	INPUT
			25.59
C				15.34
L		7.50
15.71
	25°	19.55	C	12.75	(15.30)
			L
8.10
52.35	(1.95)		SIDES
TOP/BOTTOM
		DIMENSIONS APPLY TO
DIMENSIONS APPLY TO TOP			BOTH SIDES
AND BOTTOM
509042 (A)
exp 3/29/00 dpm

NOMINAL DATA

Frequency Response

±3 dB		50	Hz to 16 kHz
-10 dB	34		Hz

Axial Sensitivity (dB SPL, 1 Watt @ 1m)

LF 97

MF 109

HF 112

Impedance (Ohms)

LF 8

MF 8

HF 8

Power Handling, AES Standard (Watts)

LF 550

MF 400

HF 200

Calculated Maximum Output (dB SPL @ 1m)

LF Peak	130.4
MF Peak	141.0
HF Peak	141.0
LF Long Term	124.0
MF Long Term	135.0
HF Long Term	135.0

Nominal Coverage Angle, -6 dB Points (degrees)

Horizontal 60

Vertical 60

Recommended High-Pass Frequency

24 dB/Octave 35Hz

ARCHITECTURAL SPECIFICATIONS

The three-way full range loudspeaker system shall incorpo- rate a 15-in woofer (vented), a 10-in cone MF transducer, and a 2-in exit compression driver HF transducer.

The MF driver shall be loaded into a midrange horn con- structed of 3mm birch plywood reinforced with high density polyurethane foam. The MF horn shall incorporate a radial phase plug. The HF driver shall be loaded on constant direc- tivity horn with a nominal coverage pattern of 60° (h) x 60°

(v).

System frequency response shall vary no more than ±3 dB from 50 Hz to 16 kHz measured on axis. The midrange fre- quency section shall produce a Sound Pressure Level (SPL) of 109 dB SPL on axis at 1 meter with a power input of 1 Watt, and shall be capable of producing a peak output of 141 SPL on axis at 1 meter. The high frequency section shall produce a Sound Pressure Level (SPL) of 112 dB SPL on axis at 1 meter with a power input of 1 Watt, and shall be capable of producing a peak output of 141 SPL on axis at 1 meter. The midrange frequency section shall handle 400 Watts of ampli- fier power (AES Standard) and shall have a nominal imped- ance of 8 Ohms. The high frequency section shall handle 200 Watts of amplifier power (AES Standard) and shall have a nominal impedance of 8 Ohms.

The loudspeaker enclosure shall be trapezoidal in shape. It shall be constructed of 15mm thickness void-free cross-grain- laminated Baltic birch plywood and shall employ extensive internal bracing. It shall be finished in wear-resistant tex- tured black paint. Input connectors shall be 1x 6-terminal barrier strip and one Neutrik NL8 Speakon. A total of sixteen 3/8"-16 threaded mounting points (4 each top, bottom and sides) shall be provided. The front of the loudspeaker shall be covered with a powder coated perforated steel grill.

The three-way full range loudspeaker shall be the EAW model MQV1366.

Acoustic Performance Partnership Eastern Acoustic Works MQV1366

One Main Street, Whitinsville MA, 01588 USA • Phone 508/234-6158 • Toll Free 800/992-5013 • Fax 508/234-8251 • Web http://www.eaw.com • email info@eaw.com