EAW SM15 specifications Dimensional Drawing, Specifications

DIMENSIONAL DRAWING

29.75 GRILLE PARTIALLY

SHOWN

SPECIFICATIONS SM15

A & E SPECIFICATIONS

The two-way full range loudspeaker system shall incorporate a 15-in neodymium LF transducer and a 3-in voice coil/1.4-in exit neodymium compression driver. Powering mode is bi- amplified.

The LF driver shall be mounted in a vented enclosure tuned for optimum low frequency response. The HF driver shall be loaded on a constant directivity horn with a nominal coverage pattern of 40° (h) x 60° (v).

14.85

2X HANDLE

R 23.28

2X INPUT

5.28

.73

3.004.00

509070 (A)

FRONT

BACK
	2X HANDLE
	8.61
.59	.59
6.96	SIDES
17.18

System frequency response shall vary no more than ±3 dB from 75 Hz to 17 kHz measured on axis. The LF shall produce a Sound Pressure Level (SPL) of 98 dB SPL on axis at 1 meter with a power input of 1 Watt, and the HF shall be capable of producing an output of 110 SPL on axis at 1 meter with a power input of 1 Watt. The LF shall handle 800 Watts of ampli- fier power (continuous) and the HF shall handle 200 Watts of amplifier power. Both shall have a nominal impedance of 8 Ohms.

The loudspeaker enclosure shall be irregularly triangular in shape with its baffle angled up 53°. It shall be constructed of multi-ply, void-free cross-grain-laminated Baltic birch ply- wood and shall employ extensive internal bracing. It shall be finished in wear-resistant textured black paint. Input connec- tors shall be 4x Neutrik NL4 Speakon (2 per side). The front of the loudspeaker shall be covered with a powder coated per- forated steel grille backed with open cell foam to protect against dust.

The two-way full range loudspeaker shall be the EAW model SM15.

509070 (A) 8/31/99

Manufacturing tolerances are +/- 0.13 and +/- 1°

One	Main Street, Whitinsville, MA 01588	508 234 6158	Toll Free 800 992 5013	FAX 508 234 8251	info@eaw.com	www. eaw. com
EAW	products are continually improved. All specifications are therefore subject to change without notice.			SM15/2 pp	October 2001	Printed in USA