EAW SM84 specifications Dimensional Drawing, Specifications

DIMENSIONAL DRAWING

TOP

29.75

GRILLE PARTIALLY SHOWN

FRONT

12.50

BACK

R 13.00

2X INPUT

3.00

	.73
	6.96
4.00	4.00
	15.90

509067(A)	SIDES
8/31/00

Manufacturing tolerances are +/- 0.13 and +/- 1°

.59

8.61

.59

SPECIFICATIONS SM84

A & E SPECIFICATIONS

The two-way full range loudspeaker system shall incorporate a four 8-in LF transducers and a 3-in voice coil/1.4-in exit neodymium compression driver. Powering mode is bi-ampli- fied.

The LF drivers shall be mounted in a vented enclosure tuned for optimum low frequency response. The HF driver shall be loaded on a constant directivity horn with a nominal coverage pattern of 40° (h) x 90° (v).

System frequency response shall vary no more than ±3 dB from 60 Hz to 17 kHz measured on axis. The LF shall produce a Sound Pressure Level (SPL) of 99 dB SPL on axis at 1 meter with a power input of 1 Watt, and the HF shall be capable of producing an output of 110 SPL on axis at 1 meter. The LF shall handle 1000 Watts of amplifier power (continuous) and have a nominal impedance of 4 Ohms. The HF shall handle 200 Watts of amplifier power and have a nominal impedance of 8 Ohms.

The loudspeaker enclosure shall be irregularly triangular in shape with its baffle angled up 53°. It shall be constructed of multi-ply, void-free cross-grain-laminated Baltic birch ply- wood and shall employ extensive internal bracing. It shall be finished in wear-resistant textured black paint. Input connec- tors shall be 4x Neutrik NL4 Speakon (2 per side). The front of the loudspeaker shall be covered with a powder coated perfo- rated steel grille backed with open cell foam to protect against dust.

The two-way full range loudspeaker shall be the EAW model SM84.

One	Main Street, Whitinsville, MA 01588	508 234 6158	Toll Free 800 992 5013	FAX 508 234 8251	info@eaw.com	www. eaw. com
EAW	products are continually improved. All specifications are therefore subject to change without notice.			SM84/2 pp	October 2001	Printed in USA