EAW SW0177 PART 2 PRODUCTS, CAZ1400, Stereo Power Amplifier, Also known as “A&E Specifications”

CAZ1400

STEREO POWER AMPLIFIER

CSI PRODUCT SPECIFICATIONS FOR DESIGNERS, SPECIFIERS, AND CONSULTANTS

(Also known as “A&E Specifications”)

The following are “Part 2 Products” CSI-type specifications. It is assumed that “Part 1 General – Administrative and Procedures” and “Part 3 Execution – Installation and Maintenance” are part of an overall audio system or project specification.

PART 2 PRODUCTS

2.01Approved Manufacturer/Product

A. EAW Commercial, One Main Street, Whitinsville, MA 01588

	B.	Model number:	CAZ1400
2.02	Design
	A.	Configuration:	2-channel power amplifier

1.Inputs:

a.Two balanced mono line inputs (two XLR/1/4" TRS combo line-level input jacks)

b.One screw terminal input strip (Channel A balanced, Channel B balanced)

2.Outputs:

a.One screw terminal output strip (Channel A, Channel B, Bridged Mono)

B.Powering Mode:

a.Internal AC power supply, 120 VAC, 60 Hz or 230 VAC, 50/60 Hz.

2.03Electrical Properties

A.Frequency Response (+0, –1 dB):

25 Hz to 25 kHz

B.Total Harmonic Distortion (20 Hz to 20 kHz @ rated output into 8 ohms):

<0.03%

C.Signal-to-Noise Ratio:

>100 dB below rated power into 4 ohms

D.Channel Separation (@ 1 kHz):

>90 dB

E.Input Gain Control Range:

Off to +30 dB

F.Maximum Input Level:

9.75 V rms (+22 dBu)

G.Rated Output:

1.Continuous sine wave average output power per channel, both channels driven:

a.310 watts rms into 8 ohms

b.450 watts rms into 4 ohms

c.800 watts rms into 2 ohms

2.Continuous sine wave average output power, bridged mono operation:

a.900 watts rms into 8 ohms

b.1400 watts rms into 4 ohms

2.04Physical Properties

A.Dimensions

1.	Height:	3.5 in/89 mm
2.	Width:	19.0 in/483 mm
3.	Depth:	15.7 in/400 mm
B. Weight
1.	Net Weight:	48.5 lb/22.0 kg

Eastern Acoustic Works One Main Street Whitinsville, MA 01588 USA	TEL toll free within US/Canada 888.337.7404
TEL outside US 425.892.6503 FAX 425.485.1152	Page 4 of 4	Part No. SW0177 Rev. C 05/07