Access Hatches
Hatches that are removed for any reason must be replaced and sealed with a
Input Cover Plates
All cover plates must be in place after connections to the loudspeaker system have been made. Conduit should be connected to cover plates using waterproof fittings. Bolts securing cover plates must be sealed with a
Drivers/Transducers
EAW drivers/transducers intended for use in Weather- Protected systems are designed specifically for outdoor applications. Failed units should only be repaired/replaced with
Acoustical Performance
Loudspeakers should be individually checked by an experienced sound system professional to verify that all drivers are operational.
Please contact the system installer or EAW for further assistance or guidance with testing.
Structural Integrity
Loudspeakers should be periodically examined for signs of physical damage. Specifically, the following should be checked:
•Damage to loudspeaker due to vandalism.
•Deterioration of mounting hardware due to rust or corrosion.
•Damage to
•Any other deterioration of the loudspeaker system including loosening of parts, accessories or attachments which could fall or cause injury.
Failure of any type should be immediately reported to the system installer or Eastern Acoustic Works Service Department.
Routine Inspection
While installed, loudspeakers should be periodically exam- ined and tested to maintain performance and safety. Two main areas for inspection are Acoustical Performance and Structural Integrity. Some of the main inspection points are as follows:
If you need assistance, please contact Eastern Acoustic Works Service Department at
DRIVERS AND TRANSDUCERS
ACCESS HATCH
ACCESS HATCH HARDWARE
INPUT COVER PLATE
COVER PLATE HARDWARE
CONDUIT
WEATHERPROOF
FITTINGS
| WEATHERPROOF FITTING |
| COVER PLATE GASKET |
| T h e L a w s o f P h y s i c s T h e A r t o f L i s t e n i n g |
|
|
PN 0000696(A) | One Main Street, Whitinsville, MA 01588 t e l 800 992 5013 / 508 234 6158 f a x 508 234 8251 web www. eaw. com |
|
|
EAW is the worldwide technological and market leader in the design and manufacture of
Page 2