Console Software
32
Console Software
The AudioFire8 Console Window: Analog Out 3-4 Tab selected.
Note that since the Analog 3-4 tab is selected you are no longer looking at the input
monitor and output controls for analog outputs 1 and 2. You are now looking at the
controls for analog outputs 3 and 4. However, you can still see the input signal on
the input level meters for Analog input 1-2.
At the top of each input channel, below the label, is a green label field that can be
changed by clicking in it and typing. Below the label is the nominal level setting
for that input channel. The labels, nominal levels, level meters and gang settings
are the only things in this section that do not change when different output bus tabs
are selected.
Moving down the input channel strip you find the input monitor controls, starting
with the input monitor pan knob. This knob changes how the input channel is