ECHO YARD SHIELD SYSTEM 11 INSTRUCTION MANUAL

1.Disconnect quick disconnect valve (A) by pushing silver button.

CAUTION

To prevent leaking, mix chemical while tank pigtail hose is disconnected from blower.

2.Remove cap from tank. To mix a full tank, pour 1.25 ounces of Yard Shield concentrate into tank. Fill tank with water to 1.5 gallon mark. Use graduation marks on concentrate bottle and backpack tank to mix less than a full tank of solution. Mix only as much as you will use in one session.

3.Replace cap.

CAUTION

Spilling hazard. Tank must remain upright at all times, otherwise contents may leak from cap.

A

Mixing Ratios

Water

Concentrate

 

 

1.5 gal.

1.25 oz.

 

 

1 gal.

.83 oz.

 

 

.5 gal.

.41 oz.

 

 

APPLICATION

WARNING

Chemicalhazard.Chemicalcauseseyeirritationandisharmfulif swallowed,inhaled,orabsorbedthroughtheskin.Wearappropriate protective clothing and devices when working with ECHO Yard Shield System. Do not spray on or near people or animals. Allow sprayed area to dry completely before permitting people or animals to enter.

CAUTION

Chemical can blow and drift. Apply on calm days. Otherwise, sprayed chemical can drift up to 150 meters, causing unintentional contact.

A full tank of Yard Shield mixture will cover 15,000 square feet.

Aim blower at the ground, bushes, shrubs, hard-to-reach places, and mosquito breeding grounds. For best results, position blower 3 - 6 feet from area to be treated and use blower at wide open throttle.

Progress at a normal walking pace, sweeping blower in a side to side motion, always overlapping passes. Avoid walking directly into spray. Apply until surfaces are wet but not dripping. People and pets may safely return to area after application is dry.

Yard Shield will remain effective for up to 3 weeks, as long as surfaces remain dry. Precipitation will wash Yard Shield away.