12

1.Push silver button on shutoff valve (B) to disengage valve, and

prevent chemical flow.

B

 

2.Start blower. (See PB-200 operator’s manual for step by step instructions on starting and stopping.)

3.Put backpack on back, and adjust straps for comfortable fit.

4.Set blower to half speed or higher.

5.Connect tank hose to clear hose on blower at quick disconnect valve (A).

NOTE

Assure blower is operating at half speed or higher before engaging shutoff valve (B).

A

6.Engage shutoff valve (B) to start chemical flow, and begin spraying.

B

NOTE

Chemical flow is gravity-fed. Flow will begin when shutoff valve is connected and backpack is positioned higher than blower.

Stopping Procedure

B

1.Push silver button on shutoff valve (B) to disengage valve and stop chemical flow.

2.Turn blower engine off (Refer to PB-200 operator’s manual.)

3.Disconnect quick disconnect valve (A).

A