ASSEMBLY | 99944200465 |
|
|
Edger Blade Installation
1.Remove bed redefining blade as shown in “Blade Replacement” Section. Discard used split pin.
2.Do not remove inner blade adapter (A) or locking tool (B).
3.Install and center edger blade (C) on inner adapter.
4.Install outer adapter (D) and nut (E).
5.Tighten nut (E) firmly, counterclockwise.
6.Remove locking tool (B).
7.Install new split pin (F) to secure nut (E).
A
B
F
E
C
D
12 | X7702096504 |
© 3/2015 ECHO Inc.
