99944200475 | MAINTENANCE |
|
|
MAINTENANCE
Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop before removing obstructions, clearing debris, or servicing unit.
Allow unit to cool before performing service. Wear gloves to protect hands from sharp edges and hot surfaces.
Your ECHO unit is designed to provide many hours of trouble free service. Regular scheduled maintenance will help your unit achieve that goal. If you are unsure or are not equipped with the necessary tools, you may want to take your unit to an ECHO Service Dealer for maintenance. To help you decide whether you want to
Skill Levels
Level 1 = Easy to do. Common tools may be required.
Level 2 = Moderate difficulty. Some specialized tools may be required.
ECHO offers REPOWERTM Maintenance Kits and Parts to make your maintenance job easier.
Maintenance Intervals
Component/System | Maintenance Procedure | Skill | Interval | |
Level | ||||
|
|
| ||
|
|
|
| |
Drive Shaft | Grease | 1 | Every 25 hours of use [1] | |
|
|
|
| |
Gear Housing | Grease | 1 | Every15 - 25 hours of use [1] | |
|
|
|
| |
Screws/Nuts/Bolts | Inspect/Tighten/Replace | 1 | Before Each Use | |
|
|
|
|
IMPORTANT - Time intervals shown are maximum. Actual use and your experience will determine the frequency of required maintenance.
(1) Apply lithium based grease.
Blade Replacement/Lubrication
Level 1.
Parts Required: | POWER BLENDXTM 8 oz. or Lithium Base |
| Grease, Blade, new split pin |
Gear Case
Note: Grease gear case every 15 - 25 hours of use. Replace
blade when it is worn shorter than 6 in. Remove blade and holders before greasing to prevent damage to gear and bearings.
1.Shut engine off.
2.Remove split pin (A).
X7702093705 | 15 |
© 4/2015 ECHO Inc.
