4' Extension Attachment

3

Operator's Manual

8.Align extension drive shaft adapter (H) with cutting attachment shaft (I).

NOTE

Locator screw in cutting attachment must align with locator hole

(L) in extension housing (J).

9. Align ridges on aluminum extension housing (J) with seams in

cutting attachment and slide cutting attachment onto extension

JL

housing. Remove locator screw (B) to align locating hole in cutting

attachment with locating hole (L) in aluminum extension housing.

10. Install and tighten locator screw (B). Tighten two (2) cutting at-

tachment screws (A).

H

J

I

4' Extension Safety Label P/N 89007522761

A

J

B

warning

The Power PrunerTM is designed to accept only one extension. Use of more than one extension or longer shafts can result in balance and control problems leading to possible personal injury to operator and bystanders and/or unit damage.

Use this extension with ECHO Power PrunerTM models ONLY.