HC Tip Guard Installation
Instructions
Kit Contents:
99988802000 – (for use with
99988802010 – (for use with
99988802030 – (for use with
Instructions:
WARNING
Hedge Clipper blades are very sharp. Touching them may lead to severe personal injury. Avoid touching blades whenever possible, and always wear gloves to protect hands.
1.Remove spark plug lead.
2.Remove blade bolt and nut (and washer, if applicable) farthest from engine.
IMPORTANT
NOTE Hardware combination and configuration. New bolt will be longer than bolt removed from unit.
3.Select identical new bolt/nut/washer combination from kit con- tents and secure tip guard onto support bar. Install hardware in original configuration.
IMPORTANT
Bolt must be installed into correct hole in tip guard so that tip guard does not contact blades and sits flat against support bar.
4.Adjust and lubricate blades according to instructions in your operator’s manual.
5.Attach spark plug lead.
| INSTRUCCIONES DE INSTALACIÓN DE LOS |
Contenido de los juegos: | PROTECTORES DE PUNTAS DE CORTASETOS |
99988802000 – (para usar con
99988802010 – (para usar con
99988802020 – (para usar con
arandelas planas
Instrucciones:
ADVERTENCIA
Las hojas del cortasetos están muy afiladas. El contacto con las mismas puede producir lesiones personales gra- ves. No toque las hojas siempre que sea posible, y lleve siempre puestos guantes para protegerse las manos.
X7672240101 | X767000271 | |
05/10 | ||
|