CHAIN AND GUIDE BAR COMBINATIONS

The following combinations may be used on CS-305 and CS-306.

 

 

DOUBLE

 

SAW CHAIN

 

 

KICK

 

 

GUARD BAR

 

 

 

GUARD

 

BAR

 

 

 

 

 

MODEL

 

 

 

 

 

 

 

LENGTH

ECHO P/N

ECHO

 

 

 

 

ECHO

 

 

 

 

 

 

 

LINKS

TYPE

PITCH

GAUGE

 

 

(OEM P/N)

PART NO.

PART NO.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

12"

12A4CD3745

90SG-45

45

 

 

 

 

 

1907045

 

 

 

 

CS-305

 

 

 

 

 

 

2894901

 

 

 

 

90SG

3/8"

.043

CS-306

 

 

90SG-52

 

28949

 

 

 

 

 

 

 

14"

14A4CD3752

52

 

 

 

 

 

1907052

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

*Reduced nose radius symmetrical bars (OREGON name — Double Guard)

WARNING DANGER

Use of replacement saw chain and/or guide bar other than that specified, or operation without the “tip guard” in place, may cause severe kickback resulting in serious injury.

Only use saw chain designated as, “LOW-KICKBACK,” that meets the ANSI B175.1-2000 Standard, and the Echo guide bar specified.

IMPORTANT

Chain and guide bar gauge size must be identical. Use Bar/Chain combinations shown in table above.

IMPORTANT

If your kick guard is damaged or lost, contact your Echo dealer for a replacement. For the name of the Echo dealer nearest you, Call: 1-800-432-ECHO (3246) or on the web at www.echo- usa.com.

Refer to your Chain Saw Safety Manual for kick guard application information.

21