Manuals / Echo / Lawn and Garden / Chainsaw

Echo CS-355T To sharpen other chains, follow chain manufacturer’s instructions, Maintenance

Models: CS-355T

1 44

Download 44 pages 18.93 Kb

Page 34

•One fifth of the file diameter remains above cutter edge.

MAINTENANCE	CS-355T

•Place the depth gauge tool firmly on guidebar so that depth gauge protrudes. Then file top of depth gauge with the flat file until flat with top of the depth gauge tool.

•One fifth of the file diameter remains above cutter edge.

•Be sure to round off the front edge of the depth gauge.

• Properly filed cutters are shown in illustration.

•When setting of the chain is finished, soak it in oil and wash away filings completely before using.

•When chain has been filed on the bar, supply sufficient oil to it, move the chain slowly to wash away the filings before using again.

•If the chain saw is operated with filings clogged in the groove, the saw chain and the guide bar will be damaged prematurely.

•If the saw chain becomes soiled with resin, for instance, clean it with kerosene and soak in it oil.

To sharpen other chains, follow chain manufacturer’s instructions.

34

1/5

Depth gauge tool

80°

30°

Top plate filing angle

Side plate angle

0.64 mm (0.025 in.)

Parallel

Depth gauge

X7503320105

© 09/2013 ECHO Inc.

Image 34

Echo CS-355T instruction manual To sharpen other chains, follow chain manufacturer’s instructions, Maintenance

Contents

Burn Hazard CS-355T CHAIN SAWTABLE OF CONTENTS TABLE OF CONTENTSCS-355T CS-355T PACKING LISTPACKING LIST Rules For Safe Operation SAFETYSAFETY CS-355TCorrect Use Of Chain Brake SAFETYTESTING THE BRAKE CHAIN BRAKE OPERATIONSAFETY Other Safety PrecautionsAUTOMATIC CHAIN BRAKE CS-355TCS-355T SAFETYNever suspend the saw on a lanyard with the engine running Eye Protection Personal Condition and Safety EquipmentPhysical Condition Hand ProtectionSAFETY Vibration and ColdRepetitive Stress Injuries CS-355TAll over head electrical conductors and communications wires can have electricity flow with high voltages. This unit is not insulated against electrical current. Never touch wires directly or indirectly, otherwise serious injury or death may result SAFETYCS-355T Symbol form/shape Symbols and SignsSAFETY Symbol form/shapeEMISSION CONTROL EXHAUST / EVAPORATIVE Manual Safety Symbols and Important InformationEMISSION CONTROL EXHAUST / EVAPORATIVE EPA 2010 and Later and/or C.A.R.B. TIERCS-355T DESCRIPTIONDESCRIPTION 09/2013 ECHO IncCHAIN SAW TERMS DESCRIPTIONCS-355T Tip Guard To Bar Instructions Guide Bar And Saw Chain-Install/removePreparation For Use CS-355TDESCRIPTION Adjusting Chain TensionImproper sprocket guard assembly can result in serious CS-355TFuel OPERATIONOPERATION Fuel RequirementsOPERATION Handling FuelAfter use CS-355TOPERATION Chain LubricantCS-355T Use bar and chain oil of high quality for this purposeCS-355T Starting Cold EngineOPERATION Never use fast idle throttle latch for cuttingCS-355T Starting Warm EngineRunning OPERATIONChain Lubrication Test StoppingChecking Chain Tension Cutting InstructionsOPERATION CS-355TKickback OPERATION Felling the TreeLimbing CS-355TCS-355T BuckingOPERATION Saw Chain Chain And Guide Bar CombinationGuide Bar Low-kickbackMaintenance Intervals MAINTENANCEMAINTENANCE Skill LevelsHigh Altitude Operation Carburetor AdjustmentEngine Break-In MAINTENANCECheck Fuel System Air FilterSpark Plug Fuel FilterSprocket Automatic OilerOil Filter A B CSpark Arrestor Muffler Cooling System CleaningClean carbon deposits from muffler components Carbon deposits in muffler will cause a drop in engine outputMAINTENANCE Exhaust Port CleaningLevel CS-355TMAINTENANCE Setting The Saw ChainSetting Saw Chain CS-355TCS-355T To sharpen other chains, follow chain manufacturer’s instructionsMAINTENANCE One fifth of the file diameter remains above cutter edgeTROUBLESHOOTING TROUBLESHOOTINGCS-355T Storage After Use STORAGESTORAGE CS-355TTechnical data subject to change without notice TECHNICAL DATATECHNICAL DATA CS-355TECHO LIMITED WARRANTY STATEMENT FOR WARRANTY STATEMENTSWARRANTY STATEMENTS PRODUCT WARRANTY PERIOD RESIDENTIAL APPLICATIONATTENTION TWO-STROKE ENGINE POWER PRODUCT OWNERS WARRANTY STATEMENTSPURCHASED REPAIR PARTS, SHORT BLOCKS AND ACCESSORIES THIS WARRANTY DOES NOT COVER DAMAGE CAUSED BYCS-355T 09/2013 ECHO IncCS-355T 09/2013 ECHO IncCS-355T 09/2013 ECHO IncAdditional or Replacement Manuals ServiceWarranty Registration Replacement Operator, Safety Manuals, and Parts Catalogs400 Oakwood Road ECHO, INCORPORATEDLake Zurich, IL