CHAIN AND GUIDE BAR COMBINATION
The following combinations are recommended for model
| Guide Bar |
| Saw chain |
| ||
Length mm (in) | Part No. | Pitch mm (in) | Part No. | Links | ||
Double Guard | ||||||
|
|
|
|
| ||
|
|
|
|
|
| |
406 (16) |
| 16F0LD3366 | 8.26 (0.325) | 20LPX66CQ, 20BPX66CQ | 66 | |
| 16F0LD3859 | 9.53 (3/8) | 72LPX59CQ, 72LGX59CQ | 59 | ||
|
| |||||
|
|
|
|
|
| |
457 (18) |
| 18F0LD3372 | 8.26 (0.325) | 20LPX72CQ, 20BPX72CQ | 72 | |
| 18F0LD3864 | 9.53 (3/8) | 72LPX64CQ, 72LGX64CQ | 64 | ||
|
| |||||
508 (20) |
| 20F0LD3378 | 8.26 (0.325) | 20LPX78CQ, 20BPX78CQ | 78 | |
| 20F0PD3870 | 9.53 (3/8) | 72LPX70CQ, 72LGX70CQ | 70 | ||
|
| |||||
|
|
|
|
|
| |
*Before using the 9.53 mm (3/8 in.) pitch bar and chain, ask your authorized ECHO dealer to change the rim sprocket.
GUIDE BAR
(Low-kickback) Replacement guide bars.
The following guide bars may be considered to have equivalent kickback energy.
• Sprocket nose guide bars of the same length and nose radius, same pitch and having the same number of teeth.
• Hard nose guide bars of the same length and nose radius as a sprocket nose bar.
SAW CHAIN
CAUTION
Do not use replacement saw chain unless it has been designated as meeting the ANSI B175.1 - 2000 kickback performance requirements, when tested on the representative sample of chain saws below 3.8 c.i.d. specified in ANSI B175.1 - 2000.
NOTE
LOW KICKBACK SAW CHAIN meets the kickback performance requirements of ANSI B175.1 - 2000 (safety requirements for gasoline- powered chain saws).
22 |
