CUTTING
WITH
NYLON LINE
WARNING DANGER
One of the intended purposes of the debris shield is to reduce the risk of the operator’s legs from being struck by thrown objects. The debris shield, however, should NOT be relied upon to provide protection for the eyes from thrown objects. Always wear approved eye protection goggles. The debris shield is also intended to assist the operator when starting the unit on the ground (the unit is rested on the debris shield, thus helping to keep the cutting line or blade in the clear). The debris shield can also help the operator determine the reach of the cutting line during operation as well as provide a limited barrier between the operator’s feet and the cutting attach- ment.
NOTE
There are two columns of pictures for each column of proce- dures in this part of the manual. One column shows curved- shaft units, the other column is for
WARNING DANGER
Some units have a plastic debris shield. The plastic shield has a
CURVED SHAFT
UNITS
DEBRISSHIELD
FOR CURVED
SHAFT UNITS
ONRIGHTSIDE
If your unit has a curved shaft, line head rotation is clockwise. The knife will be on the right side of the debris shield.
DEBRIS
CUT ON THIS
SIDE
CLOCKWISE
ROTATION
16