Echo PB-260L, PB-261L O

OPERATION

• Provide all operators of this equipment with the Operator's Manual

and instructions for safe operation.

• Check unit for loose nuts, bolts and screws daily.

• Recoil starter: Use short pulls - only 1/2-2/3 of rope length for

starting. Do not allow the rope to snap back in. Always hold the unit

firmly.

• Rotate spring loaded throttle handle downward to a comfortable

operating position.

1. Move throttle lever (A) to START/IDLE DETENT position.

2. Close Choke - Cold Start.

Move choke (B) to "Cold Start" Position.

3. Primer Bulb -Prime.

Pump primer bulb (D) until fuel is visible and flows freely in the

clear fuel tank return line. Pump bulb an additional 4 or 5 times.

4. Pull recoil starter handle (E) 4 (four) times or until engine fires.

5. Open choke (B) and if necessary, restart engine.

NOTE

Allow engine to warm up before use.