POWER BLOWER 13 OPERATOR'S MANUAL

STARTING WARM ENGINE

The starting procedure is the same as Cold Start except DO NOT close the choke.

1.Throttle Position Lever

Move throttle position lever (A) to start/idle detent posi-

tion( ).

2.Purge Bulb

Pump purge bulb (C) until fuel is visible and flows freely in the clear fuel tank return line.

3.Recoil Starter

Pull recoil starter handle (D) and engine should start.

NOTE

If engine does not start after 5 pulls, use cold start procedures.

A

C

D

STOPPING ENGINE

1.Throttle Position Lever

Move throttle position lever (A) to idle detent position(

) and

allow engine to return to idle before shutting off engine.

 

2.Move throttle lever (A) to "" (Stop) position.

WARNING

If engine does not stop when throttle lever is moved to STOP position, close choke - COLD START position - to stall engine. Have your ECHO dealer repair stop switch before using blower again.

A