POWER BLOWER
OPERATOR’S MANUAL 11
ASSEMBLY
WARNING 
DANGER
Never perform maintenance or assembly procedures with engine running or serious personal injury may result.
INSTALL BLOWER PIPES
1.Assemble throttle lever bracket to the fancase using four screws. - Set stop lead into the recess of bracket.
2.Assemble the flexible pipe thru elbow to the blower and tighten clamp.
3.Assemble the flexible pipe and the straight pipe w/swivel and tighten the clamp.
4.Assemble straight section of the pipe to the other end of the pipe.
5.Assemble the curved pipe and rotate the desired angle.
6.Shoulder harness is adjustable to fit any operator.
7.Adjust the length of strap for easier operation.
Stick handle
Clamp
Elbow
Flexible pipe | Pipe |
|
Screws
Stop lead
INSTALL STICK HANDLE
1.Remove blower pipe from swivel tube.
2.Loosen wing nut completely and expand open stick handle.
3.Align notches in handle clamp with pipe pegs. Handle should be angled away from operator.
4.Slide handle onto swivel tube.
5.Position handle for comfortable operation and tighten wing nut.
6.Install blower pipe to swivel tube.
| Stick handle |
Notch |
|
Pipe pegs |
|
Swivel | Wing nut |
tube |
|