Echo PB-755S H, PB-755S T CHOKE, HANDLE, FUELTANK, SPARK PLUG, PURGE BULB, AIRCLEANER, SAFETYDECAL, BLOWERPIPES, FUEL TANK CAP, SHOULDER HARNESS, RECOIL STARTER HANDLE

8

1.SPARK PLUG - Provides spark to ignite fuel mixture.

2.SAFETYDECAL-Lists important safety precautions.

3.SPARKARRESTOR-CATALYTICMUFFLER/MUFFLER-Themufflerorcatalyticmufflercontrolsexhaust noise and emission. The spark arrestor screen prevents hot, glowing particles of carbon from leaving the muffler. Keep exhaust area clear of flammable debris.

4.CHOKE - Move lever up to "Cold Start" () starting position and for emergency stopping. Move lever down to Run position ().

5.PURGE BULB - Pumping purge bulb before starting engine draws fresh fuel from the fuel tank, purging air from the carburetor. Pump purge bulb until fuel is visible and flows freely in the clear fuel tank return line. Pump purge bulb an additional 4 or 5 times.

6.RECOIL STARTER HANDLE- Pull recoil handle slowly until starter engages, then quickly and firmly. When engine starts, return handle slowly. DO NOT let handle snap back or damage to unit will occur.

7.FUELTANK- Contains fuel and fuel filter.

8.FUEL TANK CAP - Covers and seals fuel tank.

9.AIRCLEANER-Containsreplaceableairfilterelement.

10.HANDLE - Rotates downward for throttle control access. Spring loaded for flexible operation.

11.BLOWERPIPES-Exclusive positive locking system.

12.SHOULDER HARNESS - Used to support unit on operator's back. The straps are adjustable.

13.THROTTLEPOSITIONLEVER/STOPSWITCH -Combination stop switch and variable speed throttle lever. When the lever is moved all the way forward the blower is at Wide Open Throttle (W.O.T.). When the lever is moved rearward to detent, the blower is at idle. When the lever is moved rearward past the idle detent the blower will stop.