16

starting cold engine

•Recoil starter: Use short pulls - only 1/2-2/3 of rope length for start- ing. Do not allow the rope to snap back in. Always hold the unit firmly.

PB-755H

1.Throttle Lever

Move throttle lever (A) to IDLE DETENT position.

PB-755T

1.Throttle Lever/Stop Switch

Move throttle lever (A) forward to idle position. Slide stop switch

(B) forward to run position.

PB-755H, PB-755T

2.Choke

Move choke (C) up to "Cold Start" position ( ).

3.Purge Bulb

Pump purge bulb (D) until fuel is visible and flows freely in the clear fuel tank return line. Pump bulb an additional 4 or 5 times.

4.Recoil Starter

Pull recoil starter handle (E) until engine fires (5 or 6 pulls maxi- mum).

5.Choke

Move choke (C) down to run position ( ), and if necessary, restart engine.

NOTE

If engine does not start after 5 pulls, move choke to "Cold Start" position, and repeat steps 4 & 5.

NOTE

Allow engine to warm up before use.

PB-755H A

PB-755T B

A

C

D

C

E