Power Blower 17 Operator's Manual
starting warm engine
1.Throttle Lever
Move throttle lever (A) to IDLE DETENT position.
1.Throttle Lever/Stop Switch
Move throttle lever (A) forward to idle position. Slide stop switch (B) forward to run position.
2.Recoil Starter
Pull recoil starter handle (E) and engine should start. Do not use choke (C).
NOTE
If engine does not start after 5 pulls, use cold start procedures.
C 
E 
stopping engine
1.Throttle Lever
Move throttle lever (A) to idle detent position and allow engine to return to idle before shutting off engine.
2.Move throttle lever (A) to "O" (Stop) position.
1.Throttle Trigger/Throttle Position Lever
Release throttle trigger (C). Move throttle position lever (A) forward to idle position and allow engine to return to idle before shutting engine off.
2.Stop Switch
Slide stop switch (B) to Stop position.
WARNING
If engine does not stop when stop switch is moved to STOP posi- tion, close choke - COLD START position - to stall engine. Have your ECHO dealer repair stop switch before using blower again.
A
C