12
5. Check cutting blade tightness. Tighten blade bolts (A) until snug
with 10 mm wrench. Loosen bolts 1/2 turn. Hold bolts (A) from
turning and tighten locknuts (B) with other 10 mm wrench.
Gear Case
Tools Required: Grease Gun with ECHO® LUBETM 14 oz. cartridge
P/N 91015 or Lithium Based Grease.
Parts required: ECHO® LUBETM or Lithium Based Grease.
1. Clean dirt from grease fittings.
2. Carefully pump grease in each fitting. DO NOT force grease.
Too much pressure will force grease past seals and cause damage.
Apply 1-2 pumps of grease every 25 hours of operation.
B
A