P
OWER
P
RUNER
O
PERATOR
'
S
M
ANUAL
13A
SPECIFICATIONS

Specifications, descriptions and illustrative material in this literature are as accurate as known at the time of publication,

but are subject to change without notice. Illustrations may include optional equipment and accessories, and may not

include all standard equipment.

MODEL PPT-2100 PPT-2400
Leng th (S tanda rd ) 2.26 m (7 ft., 5 i n.) 2.74 m ( 9 ft.)
Leng th (E xtende d) 3.41 m ( 11 ft., 2 .25 in.) 3.91 m ( 2 ft., 9 .7 5 in.)
Length w/extension 5.00 m (16 ft., 5 in.) 5.49 m (18 ft.)
Width .22 m (8 .75 in.)
Height .23 m (9 .0 in.)
Weight (dry) 7.4 kg (16.3 lb.) 7.7 kg (16.9 lb.)
Engine Type Air cooled, two-stroke, single cylinder gasoline engine
Bore 32.2 mm (1.268 in.) 34.0 mm (1.339 in.)
Strok e 26.0 m m (1.0 4 in.) 26.0 m m ( 1 .0 4 i n.)
Displacement 21.2 cc (1.29 cu. in.) 23.6 cc (1.44 cu. in.)
Exhaust System Spark Arrestor Muffler
Carburetor Diaphragm, w/primer bulb
Ignition System CDI (capacitor discharge ignition)
Spark Plug NGK BPM-7A Gap 0.65 mm (0.026
in.) NGK BPM-7Y Gap 0.65 mm (0.026 in.)
Fuel Mixed (Gasoline and Two-stroke Oil)
Fuel/Oil Ratio 50:1 ECHO High Performance, two-stroke air cooled engine oil
Gasoline 89 Octane unleaded. DO NOT use fuel containing methyl alcohol,
more than 10% ethyl alcohol or 15% MTBE.
Fuel Tank Capacity 0.4 lit. (14.0 US fl. oz.)
Starter System Automatic Recoil Starter
Clutch Centrifugal Type
Sprocket Type 6 tooth spur, 9.53 mm (3/8") pitch
Power Transmission Shaft Assembly Aluminum E xtrusion
Gear Case Ratio 1.5:1
Oiling System Automatic
Saw Chain Oil Capacity 225 ml (7.6 oz.)
Handle Right han d g ri p w /th ro ttle tri g g e r a nd loc k o ut
Shoulder Harness Standard
Idle Speed (RPM) 2600 - 3100
Wide Open Throttle Speed (RPM) 8000 - 9000 11,000 - 12,000
Guide Bar and Saw Chain (91 VS) 254 mm (10 in.) ;
9.53 mm (3/8") pitch 305 mm (12 in.) ;
9.53 mm (3/8") pitch