
Power PrunerTM 19
Operator's Manual
starting warm engineThe starting procedure is the same as Cold Start except DO NOT close the choke, and do not depress throttle trigger to wide open position.
WARNING
The attachment should not move at idle, otherwise serious personal injury may result.
NOTE
If attachment moves, readjust carburetor according to “CarburetorA Adjustment” instructions in this manual or see your ECHO Dealer.
1.Stop Switch.
Move Stop Switch button (A) forward away from the STOP posi- tion.
2.Purge Bulb
Pump purge bulb (C) until fuel is visible and flows freely in the
clear fuel tank return line. Pump bulb an additional 4 or 5 times. | D |
C
3.Recoil Starter.
Lay the unit on a flat, clear area and firmly grasp right hand grip with left hand. Do not depress throttle trigger. Pull the recoil starter handle (D) until the engine fires.
NOTE
If engine does not start after 5 pulls, use Cold Start Procedure.
D