ASSEMBLY
All Front Loop Handle Models
Make sure the front loop handle is positioned beyond the minimum handle spacing line, as shown on the handle spacing decal on the drive shaft housing. The minimum handle spacing line indicates the minimum distance between the rear handle and front handle, and helps ensure the operator’s hands are far enough apart to maintain good control of the unit.
Final Assembly Check List
After assembly, check your unit to make sure guards, shields, protective devices, and all other parts are properly and securely assembled and working cor- rectly. See the Operator’s Manual for assembly details and part locations for your unit.
•Make sure all required hardware has been used and is properly tightened.
•Make sure throttle
•Make sure throttle trigger does not operate unless throttle lockout lever is depressed.
•Make sure throttle trigger returns to normal position when released.
•Make sure stop switch operates properly, moving feely between STOP and run positions.
•Move STOP switch to stop position.
•Connect spark plug lead.
NEVER fuel, start, or operate your unit unless it is fully assembled, all shields and required guards are in place, and the throttle
If parts are damaged, missing, or do not operate prop- erly, or if you have a problem assembling your unit, contact your Echo Dealer for assistance or call Echo Consumer Product Support at
Minimum Handle
Spacing Line
Minimum
Handle
Spacing
Stop Switch
Throttle
Lever
Throttle Trigger
19