ASSEMBLY
PE Models
DANGER
Modification, improper assembly, or use of unapproved blades or attachments, can result in serious injury, engine failure, and voiding of warranty. Use only Echo blades and attachments approved for use on PE Series power edger models.
Assemble unit only as instructed in Operator’s Manual, using parts provided with unit.
•NEVER modify edger or install blades or attach- ments not approved by Echo for use on Echo model PE power edgers.
•NEVER remove debris shield or deflector flap.
•NEVER install grass, weed, clearing, brushcutter, or any other type of circular metal saw blades or cutting attachment on an edger.
•ALWAYS use a new split pin each time blade is installed or replaced.
•ALWAYS remember to remove locking bar, T- wrench, and any other tools used to assemble unit or tighten hardware.
•ALWAYS store assembly tools safely away from the work area.
DANGER
Improper use of any trimmer, brushcutter, or PAS/SB unit and attachment or Power Edger, can cause serious or fatal injury. Moving edger blades and attachments can cut through work gloves, protective clothing, and footwear, and cause serious injuries. Keep hands, feet, and all other body parts away from spinning blades or attachments.
You must read, understand, and obey all safety and operating instructions in this Safety Manual, your unit’s Operator’s Manual, and in the Operator’s Manual or Installation Instructions provided with any attachment, accessory, or parts kit that will be used.
Keep Hands/Feet Away From Edger Blade
PE POWER EDGER
PE Debris Shield
Deflector Flap
18