ASSEMBLY

The Echo Pro Attachment Series and Split-Boom models allow the use of a wide range of attachments to perform various lawn, garden, and landscaping tasks. These attachments have individual safety and operating rules which must be obeyed for safe operation. You must read and understand the safety and operating instructions for each attachment before using the unit. You must also review the general safety instructions for PAS Attachments.

If you change PAS attachments, you must also make sure your front handle is properly configured for the new attachment.

PAS/SB Front Handle Configuration

The required front handle configuration of your PAS/SB unit may change, depending on the type of PAS attachment being used:

•Use the barrier bar provided with the PAS power head when instructed in the PAS Attachment Operator’s Manual.

•Remove the barrier bar when using an attachment that does not require a barrier. See the PAS/SB Attachments Barrier Bar Use table for barrier bar usage information.

BARRIER BAR USE - PAS/SB ATTACHMENTS

PAS ATTACHMENT

RECOMMENDED

OPTIONAL

NOT

RECOMMENDED

 

 

 

 

Shaft Hedge Clipper

 

 

X

 

 

 

 

Tiller-Cultivator

X

 

 

 

 

 

 

Power Pruner

 

 

X

 

 

 

 

Standard Line Trimmer

 

X

 

 

 

 

 

Pro Sweep

X

 

 

 

 

 

 

Pro Thatch

 

 

X2

 

 

 

 

Articulating Hedge Clipper

 

 

X

 

 

 

 

Brushcutter1

 

 

X3

 

 

 

 

Rapid Loader Line Trimmer

 

X

 

 

 

 

 

Pro Paddle

X

 

 

 

 

 

 

1 - See SRM/PAS/SB Blade Set-up Guide on Page 17 for blade use requirements 2 - Use J-Handle provided with Pro-Thatch attachment as a barrier

3 - Brushcutter requires U-Handle & Harness

16