MAINTENANCE
•NEVER use a unit with broken, damaged, missing, or worn parts. Contact your dealer for repairs if problems are found.
•NEVER use substitute parts, parts from other models or brands, or used parts, when performing maintenance or repairs. Use only new parts that are manufactured for your specific serial number and model trimmer.
•NEVER make temporary repairs on a unit - taking shortcuts or using questionable parts and perform- ing repairs that are not approved by Echo may create a safety hazard that can cause serious injury. Improper repair may also cause premature part failures, and void your product warranty.
•ALWAYS keep blades sharp. Cutting with dull blades increases the chances of jams and binding, reduces cutting efficiency, and increases operator fatigue.
•ALWAYS keep hedge clipper blades properly adjusted. Improperly adjusted blades may result in poor cutting performance, increased risk of jams, and premature blade wear or failure.
•ALWAYS keep blades and gear case properly lubricated. Poor lubrication can cause result in part failures and cause overheating.
•ALWAYS keep fasteners tightened securely, and use the correct tools for the job. Operation with loose fasteners can result in hazardous operation.
•ALWAYS do a safety check after performing any service or maintenance on the unit. Make sure all parts have been properly installed, all hardware is properly tightened, and all guards and shields are in place.
•NEVER reach into any opening while the engine is running. Moving parts may not be visible through openings.
46