OPERATION
•NEVER operate edger attachment unless all edger blade hardware has been properly installed.
•ALWAYS use a new split pin each time blade is installed or replaced.
•NEVER operate edger with damaged or missing debris shield.
•NEVER adjust edger blade height with engine running. Stop engine, disconnect spark plug lead, and make adjustments. Wear work gloves to pro- tect hands from hot surfaces if unit has been in operation.
•NEVER allow edger blade to strike concrete or other hard surfaces. Blade contact with concrete and hard surfaces will dislodge pieces of material and cause injury from flying debris.
PAS TILLER/CULTIVATOR ATTACHMENT
Misuse, improper assembly, or use of unapproved attachments, can result in serious injury, engine failure, and voiding of warranty. Use only Echo attachments approved for use on Pro Attachment Series models. Contact with moving cutting or work attachments can cause entanglement and serious injury. Keep clear of moving work attachment.
•NEVER use cultivator if parts are missing or dam- aged.
•NEVER use cultivator if shield is not securely in place.
•NEVER clean or reposition cultivator tines with engine running. Stop engine and remove spark plug lead.
•ALWAYS check ground for hidden obstacles before use, and remove or mark location to prevent striking with tines.
•NEVER use cultivator where there may be buried electrical wire, sprinkler tubing, or underground pipes.
44