OPERATION
• ALWAYS make sure that the pruned tree branch or |
|
limb can fall safely to the ground after cutting. |
|
• NEVER stand under a tree limb or branch during |
|
cutting |
|
• ALWAYS keep guide bar cover on guide bar until |
|
unit is ready to be used. |
|
• ALWAYS keep chain properly tensioned |
|
• NEVER make guide bar/saw chain adjustments |
|
while unit is running. Stop engine and disconnect | Keep chain properly tensioned |
spark plug lead before tensioning chain. |
•ALWAYS keep saw chain sharp. Dull chain will cause increased vibration and premature guide bar and chain failure.
•ALWAYS use only to cut wood. Cutting any other type of material can cause increased risk of kick- back and damage to saw chain and guide bar.
•ALWAYS stop engine immediately and check chain and guide bar for damage if the cutting attachment strikes an obstacle during cutting.
•NEVER use a saw chain with missing or damaged teeth. Excessive vibration and erratic operation can cause chain failure and serious injury.
PAS PROPADDLE/PROSWEEP ATTACHMENT
Misuse, improper assembly, or use of unapproved attachments, can result in serious injury, engine failure, and voiding of warranty. Use only Echo attachments approved for use on Pro Attachment Series models. Contact with moving work attachments can cause entanglement and serious injury. Keep clear of moving workattachment.
•ALWAYS keep hands and feet away from moving workattachment.
•ALWAYS allow attachment to come to a complete stop before handling.
•ALWAYS keep attachment far enough away from your body to prevent entanglement with rotating parts.
42