Manuals / Brands / Home Audio / CD Player / Eclipse - Fujitsu Ten / Home Audio / CD Player

Eclipse - Fujitsu Ten CD5425 Precautions in use of the remote control, Cleaning the remote control

1 124

Download 124 pages, 10.99 Mb

How to use an optional remote control

How to use an optional remote control

Precautions in use of the remote control

●Be careful when handling the remote control, especially because it is small and light. Dropping or striking it hard may damage it, wear out the battery or cause a malfunction.

●Keep the remote control free of moisture, dust and water. Do not subject it to shock.

●Do not place the remote control unit where it will get hot, such as on the dashboard or near a heater vent. Allowing the remote control unit to overheat may warp its case or cause other problems.

●Do not operate the remote control unit while driving because doing so could cause an accident.

●When using the remote control, point it toward at the remote control light receptor.

●The light receptor may not operate correctly if it is exposed to bright light such as direct sunlight.

●Be sure to press the [PWR] button on the main unit for more than two seconds to shut it down before leaving the car, or the car battery may be run down. When the main unit is shut down, the remote control will not work.

●Remove the batteries from the remote control unit whenever it is not to be used for a long time.

Cleaning the remote control

●Use a dry cloth to keep the unit clean. If the remote control unit gets extremely dirty, clean it with a cloth moistened with diluted liquid detergent. Do not use alcohol or thinner; these compounds may damage the finish.

●In no event should benzine or thinner be used. These substances will damage the case or finish.

76

Contents

OWNER'S MANUAL Warning Page Page Page Page Page Page Page How to operate the AREA SHOT function (U.S.A. only) How to operate the receiver with an optional CD changer How to operate the tuner with an optional HD Radio tuner How to operate the tuner with an optional SIRIUS satellite Notes on operation About compact discs About brand new CDs About CD accessories ●Do not use accessories About cleaning a CD Front view With the front open About ESN How to operate the ESN (Key CD) security How to program the Key CD Check that the unit is in standby A [SEC] message appears, in two seconds it will change to [DISC] Press the [CD] button How to cancel the Key CD A [SEC] message appears, then in two seconds it will change to [DISC] The front panel opens; The CD5425 is now ready to your Key CD in the CD slot Insert your Key CD into the slot How to change the Key CD First, cancel the existing Key CD Refer to "How to cancel the key CD Next, program a new Key CD Refer to "How to program the Key CD What happens if an incorrect CD is inserted After the 5th incorrect attempt, the display reads [HELP] for five seconds Press the [CD] button to close the front panel Press button [6], then the [FUNC] button, and hold them for five seconds Press [FUNC] button How to turn the security indicator on/off [IND. FLASH] or [IND.-----]appears on the display How to read the Electronic Serial Number Turning the power on and off When power is OFF, press the [PWR] button The power will come ON When power is ON, press the [PWR] button for less than two seconds The power will go OFF and the deck will be in Standby Listening to CD The front panel opens Insert a CD into the disc slot, label side up The CD will immediately start playing Listening to the tuner Press the [FM AM] button This will turn the tuner on Turn the [SEL] button to the left or right to tune to a station Turn to the right: Tunes to higher frequencies Adjusting audio volume Turn the [AUDIO CONTROL] button to the left or right Turn to the right: Increases the volume Turn to the left: Decreases the volume Switching audio control modes Various audio control modes may be fine-tunedusing this procedure Modes will switch in the order shown below each time the button is pressed VOL (VOLUME) Mode Adjusts volume MID (MIDDLE) Mode TREB (TREBLE) Mode BAL (BALANCE) Mode FAD (FADER) Mode NON-F (NON-FADER)Mode SVC (Source Volume Control) Mode Setting examples: Audio mode Default value Reference The volume difference can be set within a range of -10to +20 LOUD Mode Recording user presets for the equalizer Press the [AUDIO CONTROL] button for more than one second Changing the equalizer mode Press the [SOUND] button for less than one second How to operate the Sound Adjustment Mode About Sound Adjustment Mode Crossover ●The crossover function is a filter that allocates specified frequency bands Non-faderphase Making changes with Sound Adjustment Mode Press the [SOUND] button for more than one second Turn the [SEL] button to select a setting item Press the [SEL] button Disabling the Cross Over (F, R) function Front and rear speaker HPF (High Pass Filter) can be turned ON/ OFF Turn the [SEL] button to select ON or OFF The selected settings will take effect Press the [RTN] button Disabling the Cross Over (NF) function Woofer (non-faderoutput) LPF (Low Pass Filter) can be turned ON/ OFF Non-faderphase selection (NON-FPhase) Turn the [SEL] button to select NORMAL or REVERSE Press the [SOUND] or [RTN] button to exit soud adjustment mode Making changes with Display Adjustment Mode Press the [DISP] button for less than one second Contrast adjustment Turn the [SEL] button to adjust contrast Press the [DISP] or [RTN] button to exit display adjustment mode Making changes with Function Mode A variety of settings can be changed Press the [FUNC] button for less than one second The function mode is activated When the button is turned, the setting item changes in the following order Disabling the guide tone feature (for button operation) Turn the [SEL] button to select GUIDE TONE Press the [FUNC] or [RTN] button to exit function mode Clock display on/off Turn the [SEL] button to select CLOCK DISP. Press the [SEL] button Setting the time Turn the [SEL] button to select CLOCK ADJ Press the [SEL] button to display the item to be selected for adjustment Turn the [SEL] button Setting the steering switch function (U.S.A. only) Reading steering switch data Turn the [SEL] button to select STEER SW [INSERT DISC] appears on the display and the panel opens automatically Insert the CD-Rto be used for saving the steering switch data The selection file name is highlighted Page Compatibility with various switches Displays the compatibility of the system’s modes and the steering switch Others Adjustment of the front panel angle Push and hold the [TILT] button with the display completely closed When the display has opened to the desired angle, release the [TILT] button Listening to CDs This starts CD play A changer or player with no discs loaded will be skipped Turn the [SEL] button to the left or right Turn to the right: Advances to the next track Fast Forward/Rewind Fast forward or rewind the song currently being played Press and hold the [] or [] button Press the [5 RPT] button to repeat the track being played To cancel, press the [5 RPT] button again Press the [6 RAND] button to play the tracks in random order To cancel, press the [6 RAND] button again Ejecting the disc The front panel opens and the disc is ejected Remove the disc and press the [CD] button Displaying CD TEXT Press the [DISP] button for more than one second About MP3 Media Format of discs ● Maximum directory layers: ●Number of files/folders possible on a single disc: ●Total number of folders possible on a single disc: File names Multi-sessions Playing MP3 MP3 playing time display Display order of MP3 file/folder names Listening to MP3 file ● Note ● Skipping to the next or previous folder Press button [1 ] or [2 ] Return to the root directory of the CD Playing the beginning of files (SCAN) Repeating the same file (REPEAT) Press the [5 RPT] button Press the button briefly to repeat the file being played Playing files in random order (RANDOM) Press the [6 RAND] button Displaying title Each time the button is pressed, the following will be displayed in order Folder Name/File Name* ➔ Folder No./File No. ➔ Tag First, press the [FM AM] button to start tuner operation [] button: Starts searching toward higher frequencies [] button: Starts searching toward lower frequencies Entering stations into memory automatically (The automatic preset mode: ASM) Press the [SEL] button for more than two seconds until a beep is heard The automatic preset mode starts These buttons are called preset buttons Press the [FM AM] button for less than one second to switch between FM and AM Select any button, from [1] to [6], and press it for more than two seconds Press the [SEL] button for less than two seconds Changing the reception sensitivity for automatic scanning Check that the deck is in standby mode Changing the radio band location FM reception characteristics FM reception differs from AM Fading out Reception area of FM broadcasts Multipath About the AREA SHOT To use the AREA SHOT function The process is as follows: Reading the AREA SHOT data Turn the [SEL] button to select AREA SHOT Insert the CD-Rto be used for for saving the AREA SHOT data Turn the [SEL] button to select the saving file Page Changing the AREA SHOT mode Press the [MUTE] button for more than one second Using the AREA SHOT mode Switching between guidance points Press [] and [] to switch between guidance points Re-scrollingthrough text information Press the [DISP] button Display Arrows Arrows for indicating turn directions are displayed as follows Depending on driving conditions, arrows indicate the following: Expressway Intersection Precautions in use of the remote control Cleaning the remote control Turning the power on/off Press the [PWR] button Adjusting the audio volume Press the [] or [] button Muting the volume Switching playback modes Press the [MODE] button Press the button to switch modes in the following sequence: How to play the tuner Select the tuner mode first Selecting a station (manually or automatically) Press the [TUNE•SEEK] button Selecting preset stations Press the [PRESET CH] button How to play CDs Press the [TRACK] button [] button: Advances to the next track Skipping to the next or previous disc [] button: Selects the next higher number disc [] button: Selects the next lower number disc How to play MP3 ] button: Advances to the next track (file) tracks (files).) Skipping to the next or previous folder [] button: Selects the next folder Replacing the battery Use two AAA size batteries Page Listening to a CD Press the [DISC] button for less than one second Page Skipping to the next or previous CD Button [1 ]: Selects the next lower number disc Button [2 ]: Selects the next higher number disc Specifying a CD to play Press the [SEL] button for less than one second Press a button from [1] to [6] About HD Radio Page Page Page Page Switching between displays when receiving HD Radio HD Radio reception settings Turn the [SEL] button to select HD Radio The mode will change to reception setting mode Turn the [SEL] button to select AUTO or OFF In the [OFF] setting, reception is always analog The selected setting will take effect About SIRIUS satellite radio URL: http://cdn.sirius.com The receiver will accept up to 24 stations in memory Selecting the radio mode Press the [FM AM] button for more than one second Selecting a channel Turn the [SEL] button to the left or right to tune to a channel Category selection Press the [] or [] button for more than one second Categories will switch in order shown below each time button is pressed Advance to next category Direct channel selection Manually setting channels into memory Preset channel scan The receiver will stay tuned to the desired channel Switching displays when using the SIRIUS satellite radio channel name ➔ category name ➔ title ➔ artist ➔ SIRIUS unit ID Connecting portable audio players (to the AUX jack) Turn on the portable audio player and start its play function Switch to AUX mode by pressing the [DISC] button for more than one second Changing auxiliary input sensitivity The sensitivity of the auxiliary mode can be changed THe function mode is activated Turn the [SEL] button to select AUX Sensitivity The selected item is highlighted User Registration Key display Page Displayed information (for troubleshooting) Page Page <GENERAL <FM TUNER <AM TUNER <CD SECTION <AUDIO AMPLIFIER Loudness Components Installation angle Mounting the main unit Mount the stud bolt to the main unit Insert the main unit into the mounting sleeve until it locks in place Fasten the rear of the main unit using either method [A] or [B] Select method [A] or [B] to suit the interior configuration of the vehicle Install the bezel on the main unit. [A] Page Names of lead wires and destinations (refer to Page 115) ● Caution ● System 1) CD5425 Receiver, used alone Caution 2) CD5425 + CH3083 + CH3083 + Power Amplifier Note Page 4) CD5425 + CH3083 + 21010 + Power Amplifier 5) CD5425 + EXTERNAL PRODUCT (MP3 PLAYER, MD PLAYER, etc) Page Page Page Page CUSTOMER NOTICE Serial No www.eclipse-web.com