Ecom Instruments Ex-Pt 720 Calibration instructions, Repairs, Cleaning and maintenance

Stainless-steel insertion probe
0600	9999	measurement range:-50 ... 400°C
0628	2232:	accuracy:	class A
		Ex-Zones:	2, 1, 0

probe dimensions: >50mm x >4mm (w x ø)

sensor dimensions: >15 x >3mm (w x ø) response time (99%):10 Sec.

7.4.3 Calibration instructions

The plastic handle withstands a temperature of approx. 200°C for a short time. A long-term maximum of 90°C is recommended. Please take this into account when calibrating the system or indi- vidual components.

8. Repairs

Should repairs be necessary, then the conditions of ELEX V must be complied with. We recommend that repairs be carried out in the manufacturer’s factory as it is necessary for the unit to be checked for technical and safety reasons.

9. Cleaning and maintenance

The unit should only be cleaned with a moist cloth or sponge. Detergents or abrasive materials should not be used.

We recommend that the function and accuracy of the unit be checked every two years by the manufacturer.

10. Guarantee & liability

For this product, ecom Instruments GmbH guarantees the function and material for a period of two years under normal operating and maintenance conditions.

The guarantee does not apply to products which are improperly used, modified, neglected, damaged in accidents or exposed to abnormal operating conditions.

Claims under the guarantee can be made by returning the defecti- ve equipment to the factory. We reserve the right to repair, renew the settings or exchange the device.

The above-mentioned guarantee conditions are the sole and only right of the purchaser to compensation, are exclusively valid and replace all other contract or legal warranty obligations. ecom Instruments GmbH accepts no responsibility for special, direct, indirect, accompanying or consequential damage as well as losses including the loss of data which may arise through the use or acquisition of the equipment independent of whether it was cau- sed by violation of the warranty obligation, lawful or unlawful action, action in good faith or any other action.

If in certain countries the limitation of a legal guarantee as well as the exclusion or limitation of accompanying or consequential damage is not permissible, it may be that the above-mentioned limitations and exclusions are not valid for every purchaser. Should any such clauses of these guarantee terms be declared null and void or not realisable by a competent court, then the effectiveness or enforceability of any of the other conditions of these guarantee terms will be unaffected by the court decision.

24 25