Fan Only Mode | Fan Only mode is used to circulate the air in your room. No temperature | |
setting is needed. The front panel lights will be green. | ||
|
To operate the unit in Fan Only mode:
1)Make sure the power cord is plugged into a power outlet.
2)Press the 
Power button on the remote control.
NOTE: Fan Only mode does | 3) Press the | Mode button until the Fan Only indicator is selected. | |
not require that the exhaust | 4) Press the | Speed button to select the fan speed. You can choose | |
hose be attached. | |||
between | Automatic, High, Medium and Low. | ||
|
Automatic Mode | In Automatic mode, the unit will cool, dehumidify, or heat (some models) | |
depending on the ambient temperature. As the temperature in the room | ||
| ||
| changes, the mode and fan speed will change automatically. The front | |
| panel lights will change depending on the mode. |
To operate the unit in Automatic mode:
1)Make sure the power cord is plugged into a power outlet.
2)Press the 
Power button on the remote control.
3)Press the 
Mode button until the 
Automatic indicator is selected.
Fan Speed |
| The | Fan Speed button is used to change the fan speed while in | ||||
|
| Cooling and Fan Only modes. |
|
| |||
|
| Press the | Fan Speed button to select the fan speed. The | ||||
|
| Automatic, High, | Medium or | Low indicator can be selected. | |||
|
| Note: You will not be able to change the fan speed if the unit is in | |||||
|
| Automatic or Dehumidify mode. |
|
| |||
|
|
|
| ||||
Clock |
| The | Clock button is used to set the Clock. | ||||
TIP: Use the Chart below: | To set the Clock: |
|
|
| |||
1) Press and hold the | Clock button until the Clock indicator starts | ||||||
1:00 PM | 13:00 | blinking. |
|
|
|
| |
2:00 PM | 14:00 | 2) Set the time by using the | Up and | Down buttons. Holding | |||
3:00 PM | 15:00 | down the buttons longer than 1 second will change the time in fast mode. | |||||
4:00 PM | 16:00 | The clock is a | |||||
5:00 PM | 17:00 | be 18:00. |
|
|
|
| |
6:00 PM | 18:00 | 3) To save your settings press and hold the | Clock button until the | ||||
7:00 PM | 19:00 | ||||||
Clock indicator stops blinking. |
|
| |||||
8:00 PM | 20:00 |
|
| ||||
|
|
|
|
| |||
9:00 PM | 21:00 |
|
|
|
|
| |
10:00 PM | 22:00 |
|
|
|
|
| |
11:00 PM | 23:00 |
|
|
|
|
| |
12:00 AM | 00:00 |
|
|
|
|
| |
13
