USING YOUR ICE MAKER
1.Select the size of the ice cube by pressing the “Select” button. If the room temperature is lower than 60°F, it is best to select the small or medium ice size, otherwise the ice cubes might stick together.
2.Open the cover, remove the ice basket and pour water into tank. Keep water level below the level mark.
3.Press “Power” on the control panel to begin the ice making cycle.
4.The ice making cycle lasts 6 to 15 minutes, depending on the size of the ice cubes selected.
5.While the ice maker is on, verify the water level periodically. If the water level is too low, the ice maker will stop automatically, and the “Water” indicator will turn on.
Press the “Power” button, fill the unit with water, and press “Power” again.
Allow the refrigerant inside the compressor at least 3 minutes to settle before restarting.
6.The ice maker automatically stops working when the ice basket is full.
7.Change the water in the water reservoir every 24 hours to ensure a reasonable hygiene level.
If the ice maker will not be used for an extended period of time, you should drain the water from the reservoir.
TROUBLESHOOTING
| PROBLEM |
| POSSIBLE CAUSE | SOLUTION | ||||
|
|
|
|
| ||||
The | “Water” | indicator is | Low water level. | Stop the ice maker, fill it with | ||||
on. |
|
|
|
|
|
|
| water, and then restart it. |
The “Ice” indicator is on. | The ice basket is full. | Remove ice from the ice basket. | ||||||
The | “Water” | and | “Ice” | The | ice | shovel cannot | Check if the ice is blocking the | |
indicators |
| are | both | move. |
| ice shovel, otherwise, consult a | ||
flashing. |
|
|
|
|
|
| qualified technician. | |
|
|
|
|
|
|
|
| Stop the ice maker, and restart it |
|
|
|
|
| The ice cycle is too long. | when the ice blocks melt. Select | ||
The | ice | cubes | stick |
|
|
| the small ice button. | |
together. |
|
|
| The | water | temperature in | Change the water in the inner | |
|
|
|
|
| the inner tank is too low. | tank. The ideal water temperature | ||
|
|
|
|
| is | |||
|
|
|
|
|
|
|
| |
|
|
|
|
| The | ambient temperature | Please run the ice maker in | |
The | ice | making | cycle | or the water temperature is | temperatures below 90°F and/or | |||
too high. |
| pour colder water into tank. | ||||||
seems normal but no ice is |
|
| ||||||
Refrigerant liquid leakage. | Consult a qualified technician. | |||||||
produced. |
|
|
|
|
|
|
| |
|
|
| A pipe in the cooling | Consult a qualified technician. | ||||
|
|
|
|
| ||||
|
|
|
|
| system is blocked. |
| ||
5
