EdgeStar IP200 owner manual The “Water” and

Models: IP200

1 13
Download 13 pages 38.21 Kb
Page 8
Image 8

 

The “Water” and

The

ice shovel cannot

Check if the ice is blocking the ice

 

“Ice”

indicators

move.

 

pusher, otherwise, consult service.

 

are both flashing.

 

 

 

 

 

 

 

 

 

 

 

 

Stop the ice maker, and restart it

 

 

 

 

 

The ice cycle is too long.

when the ice blocks melt. Select

 

The

ice

cubes

 

 

 

 

the small ice button.

 

stick together.

 

The water temperature in

Change the water in the inner tank.

 

 

 

 

 

The ideal water temperature is

 

 

 

 

 

the inner tank is too low.

45°-90°F.

 

 

 

 

 

 

 

 

 

 

 

 

 

The unit is being run off

Plug the unit into a 110/120 Volt,

 

The compressor

 

the

wrong voltage

or

 

 

60 Hertz power source.

 

makes a loud

 

frequency.

 

 

 

buzzing noise

 

The

compressor

was

Contact the shipper.

 

 

 

 

 

 

 

damaged in shipping.

 

 

The unit does

 

Power is not supplied to

Plug the unit into a 110/120 Volt,

 

nothing

 

the unit.

 

60 Hertz power source.

 

 

 

 

 

The ambient temperature

Please run the ice maker in

 

The

ice

making

 

or the water temperature

temperatures below 90°F and/or

 

cycle

 

seems

 

is too high.

 

pour colder water into tank.

 

normal but no ice

 

Refrigerant leakage.

 

Consult a qualified technician.

 

is produced.

 

A pipe in the cooling

Consult a qualified technician.

 

 

 

 

 

 

 

system is blocked.

 

 

6

Page 8
Image 8
EdgeStar IP200 owner manual The “Water” and