Step 4. Press the Set button to assign the selected port to the VLAN group. After
you press Set button ,the selected port LED will switch between on and
off. If the selected port LED is on, the selected port is added to the
VLAN group. If the selected port LED is off, the selected port is
removed from the VLAN group.
Step 5. Repeat steps 3 to 4 to assign other ports to the selected VLAN group.
Step 6. When you finish one VLAN group configuring, press the Group button
to scroll to the next VLAN group. Repeat steps 3 to 4 and assign ports to
the new group.
Step 7. Press the Function button until the SAVE LED is on.
Step 8. Press the Set button to save the setting.
Step 9. Press the Function button to return to normal mode.
This switch provides the port trunking function which can help
user to reduce the bottleneck by providing more than one connection
between two switches.
1.2Gbps Trunk
800Mbps Trunk