Edimax Technology EU-4230 manual Mac 10.3.X/10.4.X/10.5.X, Connecting to Your Network

7.Mac 10.3.X/10.4.X/10.5.X

1.Insert the provided driver CD into your CD-ROM drive. Double-click the CD and navigate to the directory of \Drivers\Mac\

2.Wait a while for the program to install the driver.

3.When the installation is done, click Finish.

4.Please enter your password as prompted.

5.Select Continue Installation to install the software and then Reboot the Mac.

6.Connect the Ethernet adapter to a free USB port. Then a New port Detected screen will prompted, and you will find that a new Ethernet network interface is available.

Connecting to Your Network

Now the installation is complete. You can connect the adapter to your network device such as hub, switch or router by an Ethernet cable. The Link LED should light up to indicate a proper physical connection between the adapter and the network.

This Quick Installation Guide describes only the basic instructions on installation. For more information, please refer to the User’s Manual on the provided CD-ROM.

6