Edimax Technology EW-7206PDg

Wireless LAN Access Point Configuration

tool to upload and restore the saved configuration to the Access Point.

Alternatively, you can use the "Restore to Factory Default" tool to force

the Access Point to perform a power reset and restore the original factory

settings.

Contents

Main Table of Contents Chapter 1Introduction ....................................................................1 Chapter 2Wireless LAN Access Point Connection .....................5 Chapter 3 3.1 3.2 Configuring the Access Point......................................................... 11 Chapter 4Troubleshooting...........................................................44 Chapter 1 Introduction 1.1 Package Contents 1.2 Features 1.3 Specifications 1.4 Physical Description Front Panel Back Panel Page Chapter 2 Wireless LAN Access Point Connection Chapter 3 Wireless LAN Access Point Configuration 3.1 Getting Started 8. Reboot the PC. Your PC will now have the IP Address you specified. 1b) Windows XP 1c) Windows 2000 6. Click OK to confirm the setting. Your PC will now have the IP Address you specified. 1d) Windows NT 1. Click the Start button and select Settings, then click Control Panel. The Control Panel 2. Double-click Network icon. The Network window will appear. Select the Protocol tab from 3. Check if the TCP/IP Protocol is on your list of Network Protocols. If TCP/IP is not installed, 4. In the Select Network Protocol window, select the TCP/IP Protocol and click the Ok Page 3.2 Configuring the Access Point 3.2.1 Status and Information 3.2.2 Wireless Setting Page Page Page Page Page MAC Address WLAN MAC Root AP SSID Set Security Set Security Page Page Wireless Site Survey 3.2.3 Advanced Setting Authentication Type Fragment Threshold RTS Threshold Beacon Interval Data Rate Preamble Type Broadcast ESSID IAPP 3.2.4 Security WEP only Page 802.1x only 802.1x WEP static key WPA pre-shared key Page WPA RADIUS Page 3.2.5 MAC Address Filtering Page 3.2.6 System Utility Page Page Page 3.2.7 Configuration Tool Page 3.2.8 Firmware Upgrade 3.2.9 Reset Chapter 4 Troubleshooting