The descriptions of every setting in this menu will be given below:
Item | Description |
Upgrade | If you downloaded latest firmware file from our |
Firmware | website, you can click this button to start to upload |
| the firmware file to the IP camera, and you’ll be |
| prompted to provide the location of firmware file. |
| Click ‘Open’ to start uploading new firmware and IP |
| camera will start upgrading, please be patient. The |
| IP camera will reboot after the upgrade procedure is |
| done. |
Reset to | Clear all settings in the camera. Please think again |
Default | before you do this, and then click this button to |
| reset all settings. |
| NOTE: IP address will be reset to default value |
| ‘192.168.2.3’ also. You’ll need to change the IP |
| address setting of your computer if the IP address |
| of your computer does not begin with ‘192.168.2’, |
| and subnet mask is not ‘255.255.255.0’, or you’ll |
| not be able to connect to this IP camera again. |
LED Light | Switch the LED light of this IP camera off, so ‘LAN’ |
OFF | and ‘WLAN’ LED on the IP camera will stop |
| working, in case you don’t want other people know |
| the camera is transferring data. |
| You can click this button again to switch LED lights |
| on again. |
After all settings are completed, click ‘OK’ to save settings, or click ‘Cancel’ to abort and discard changes.
22
